[an error occurred while processing this directive]
|
These papers require Adobe® Reader®,
which can be downloaded from www.adobe.com
Use 'Ctrl F' to search in this page
|
| |
A - B
| C -
D | E- F | G
- H | I - J | K
- L | M - N | O
- P | Q - R | S
- T | U - V | W
- Z |
|
| S Ahzi |
A Digital Image Analysis for Determining
Mode I and Mode II Stress Intensity Factors (Paper No.55 )
S M’Guil, N Bahlouli, C Husson, S Ahzi
Universite Louis Pasteur/CNRS, France |
| R Akkerman |
Modelling
of a Steel Reinforced Thermoplastic Pipe (Paper No.23 )
M P Kruijer, L Warnet, R Akkerman
University of Twente, Netherlands |
| O Allix, |
Identification
of a Delay-Damaged Mesomodel for the Localization and Rupture
of Composites: Feasibility and Identification Strategy (Paper
No. 104)
P Feissel, O Allix, P Thevenet
Laboratoire de Mecanique et Technologie, France |
| M Alshaaer |
Durability
of Glass Fibre Reinforced Composites Experimental Methods and
Results (Paper No. 40)
H Cuyperes, J Wastiels, E de Bolster, G Moselmans, M
Alshaaer
Vrije University of Brussels, Belgium |
| E Aoyama |
Development
of Design System for FRP Gears for Power Transmissions (Paper
No.64)
T Hirogaki, E Aoyama, T Katayama, K Sugimura,
Y Yagura
Doshisha University/ Ishida Co Ltd, Japan |
| A Avanzini |
Fatigue
Damage Analysis of a Steel-Composite Hybrid Pin (Paper No. 47)
A Avanzini,
G Donzella, A Mazzu, V Zacche
University of Brescia, Italy |
| S Avril |
Experimental
Identification of a Damage Model for Composites using the Grid
Technique Coupled to the Virtual Fields Method (Paper No. 88)
H Chalal, F Meraghni, S Avril, F Pierron
ENSAM, France
Identification of the
Through-thickness Elastic Constants of Thick Laminated Tubes
using the Virtual Fields Method (Paper No. 89)
R Moulart, S Avril, F Pierron
LMPF-ENSAM, France
Identification of the Elastic
Constants of Composite Materials using Deflectometry (Paper
No. 102)
S Avril,
M Grédiac, F Pierron, Y Surrel, E Toussaint
LMPF/LERMES/CNRS-LM3, France |
| N Bahlouli |
A Digital Image Analysis for Determining
Mode I and Mode II Stress Intensity Factors (Paper No.55 )
S M’Guil, N Bahlouli, C Husson, S Ahzi
Universite Louis Pasteur/CNRS, France |
| X Balandraud |
Experimental
Investigation of Composite Patches with a Full-Field Measurement
Method (Paper No. 11)
J-D Mathias, X Balandraud, M Grediac
French Institute for Advanced Mechanics/LERMES, Blaise Pascal
University, France |
| N Balthi |
Intralaminar Fracture in CFRP Laminates
(Paper No.51)
N Vrellos, S L Ogin, P A Smith, N Balthi, F
J Guild, B W Drinkwater
University of Surrey / University of Bristol, UK |
| W M Banks |
The
Effect of Ply Orientation on the Peak and Delamination Threshold
Loads of CFRP Composite Plates (Paper No. 45)
O S David-West, D H Nash, W M Banks
University of Strathclyde, UK |
| D Baptiste |
Multiscale Modelling of the Strain
Rate Dependent Damage in Sheet Moulding Compound Composites
(Paper No. 85)
F Meraghni, Z Jendli, J Fitoussi, D Baptiste
ENSAM Chalons en Champagne/ENSAM Paris, France |
| R A Barnes |
Strain
Monitoring of Smart Concrete Cylinders with Overwrap Composite
Materials using Fibre Optic Sensors (Paper No. 111)
J S Leng, D Winter, R A Barnes, G C Mays, G
F Fernando
Cranfield University, Shrivenham, UK |
| G Baruffaldi |
3D
Finite Element Damage Analysis of a Twill-weave Lamina Subjected
to In-Plane Shear (Paper No. 81)
G Baruffaldi, E
Riva, G Nicoletto
Universita di Parma, Italy |
| P Baylou |
Fibre
Orientation Measurements in Composite Materials (Paper No.
28)
R Blanc, J P da Costa, C Germain, P Baylou,
M Cataldi
ENSEIRB, ENITAB, France
An Image Analysis Approach for the Structural Characterisation
of Pyrocarbons (Paper No. 29)
J P da Costa, C Germain, P Baylou, M Cataldi
ENSEIRB, ENITAB, France |
| G Ben |
Damage
Extension and Failure Behaviour of CFRP Specimens in Open Hole
Compression Tests and Analytical Simulation (Paper No. 91)
T Kato, T Ishikawa, Y Hamaguchi, N Shikata, G Ben
Japan Aerospace Exploration Agency/ Nihon University, Japan |
| R Berger |
Industrialised
Shearography Testing on Aircraft Composites in Combination with
3D Imaging and Defect Location (Paper No. 98)
J Collrep, R Berger
Interferometry, Steinbichler Optotechnik GmbH |
| O K Bergsma |
Square
Grid Analysis for Intraply Shear in Thermoformed Thermoplastic
Composites (Paper No. 57)
G F Nino, O K Bergsma, H E N Bersee
TU Delft, Netherlands |
| H E N Bersee |
Square
Grid Analysis for Intraply Shear in Thermoformed Thermoplastic
Composites (Paper No. 57)
G F Nino, O K Bergsma, H E N Bersee
TU Delft, Netherlands |
| H Biermann |
Tomography
Based Approach for Finite Element Modelling of Particle Reinforced
Metal-Matrix Composites (Paper No. 22)
P Keensei, H Biermann, A Borbely
Eotvos Lorand University, Hungary/Technische Universitat Freiburg,
Germany |
| R Blanc |
Fibre
Orientation Measurements in Composite Materials (Paper No.
28)
R Blanc, J P da Costa, C Germain, P Baylou,
M Cataldi
ENSEIRB, ENITAB, France |
| E de Bolster |
Durability
of Glass Fibre Reinforced Composites Experimental Methods and
Results (Paper No. 40)
H Cuyperes, J Wastiels, E de Bolster, G Moselmans,
M Alshaaer
Vrije University of Brussels, Belgium |
| I P Bond |
Development
and Evaluation of Self Repairing Concepts for Composite Materials
(Paper No. 9)
J Pang, I P Bond
University of Bristol, UK
Methods of Monitoring
Fatigue Damage under Variable Amplitude Loading in CFRP Composites
(Paper No. 20)
M Bourchak, I R Farrow, I P Bond
University of Bristol, UK |
| C Bordreuil |
Use
of Full Field Strain Measurements to model the behaviour of
CFRP woven ply laminates (Paper No. 10)
C Bordreuil, C Hochard, N Lahellec, F Mazerolle
LMA/CNRS, France |
| A Borbely |
Tomography
Based Approach for Finite Element Modelling of Particle Reinforced
Metal-Matrix Composites (Paper No. 22)
P Keensei, H Biermann, A Borbely
Eotvos Lorand University, Hungary/Technische Universitat Freiburg,
Germany |
| J Botsis |
Residual
Strain Development in Laminated Thermoplastic Composites Measured
using Fibre Bragg Grating Sensors (Paper No. 53)
L Sorensen, T Gmur, J Botsis
Swiss Federal Institute of Technology
Transverse Evolution of the
Residual Stresses in Notched Epoxy Cylinders using the OLCR
Technique and Embedded FBG Sensors (Paper No. 38)
F Colpo, L Humbert, J Botsis
Swiss Federal Institute of Technology |
| J-P Bouquet |
Non-homogenous
CFRE Strain Field Monitoring with the Electronic Speckle Pattern
Interferometry Technique (Paper No. 49)
J-P Bouquet,
A H Cardon
SABCA/Vrije Universiteit Brussel, Belgium |
| M Bourchak |
Methods
of Monitoring Fatigue Damage under Variable Amplitude Loading
in CFRP Composites (Paper No. 20)
M Bourchak,
I R Farrow, I P Bond, University of Bristol, UK |
| C Breen |
Influence
of a Near Free Edge on the Impact of Thick CFRP Panels (Paper
No. 30)
C
Breen, F Guild, M Pavier
University of Bristol, UK |
| W R Broughton |
Analytical
Models for Assessing Environmental Degradation of Unidirectional
and Cross-Ply Laminates (Paper No. 66)
W R Broughton,
M J Lodeiro, National Physical Laboratory, UK |
|
|
 A
- B | C
- D | E- F
| G - H | I
- J | K - L |
M - N | O - P | Q
- R | S - T | U
- V | W - Z |
|
| |
|
| P P Camanho |
Failure
Criteria for Prediction of Transverse Matrix Cracking in Composites
(Paper No. 4)
P P Camanho, C G Davila
DEMEGI, Portugal
A Continuum Damage Model for
the Simulation of Delamination under Variable Mode Ratio in
Composite Materials (Paper No. 48)
A Turon, P P Camanho, J Costa, C G Davila
Universitat de Girona, Spain/ Universidade do Porto, Portugal/NASA
Langley, USA |
| B Cantor |
Extracting
Matrix Creep Parameters for Modelling the Consolidation of Matrix-
Coated Fibre Composites (Paper No. 12)
H-X Peng, M R Wisnom, F P E Dunne, P S Grant, B Cantor
University of Bristol /University of Oxford /University of York,
UK |
| A H Cardon |
Non-homogenous
CFRE Strain Field Monitoring with the Electronic Speckle Pattern
Interferometry Technique (Paper No. 49)
J-P Bouquet, A H Cardon
SABCA/Vrije Universiteit Brussel, Belgium |
| D D R Cartié |
Mechanical
Properties Balance in Novel Z-pinned Sandwich Panels (Paper
No. 67)
A I Marasco, D D R Cartié, I K Partridge
and A Rezai
Cranfield University/ BAE SYSTEMS ATC Sowerby, Bristol UK |
| P Casari |
Mechanical
Response of a Fiber Bragg Grating Sensor in a Non-uniform Stress
Field (Paper No. 99)
P Casari, X Chapeleau, D Leduc
GeM, Nantes, Fra
Characterization of
Manufacturing Residual Stresses in Wound Composite Tubes (Paper
No. 95)
P Casari, F Jacquemin, P Davies
GeM, Nantes, France |
| M Cataldi |
Fibre
Orientation Measurements in Composite Materials (Paper No. 28)
R Blanc, J P da Costa, C Germain, P Baylou, M Cataldi
ENSEIRB, ENITAB, France
An Image Analysis Approach
for the Structural Characterisation of Pyrocarbons (Paper No.
29)
J P da Costa, C Germain, P Baylou, M Cataldi
ENSEIRB, ENITAB, France |
| H Chalal |
Experimental
Identification of a Damage Model for Composites using the Grid
Technique Coupled to the Virtual Fields Method (Paper No. 88)
H Chalal, F Meraghni, S Avril, F Pierron
ENSAM, France |
| Seung Hwan Chang |
Microscopic
Observation of Tow Deformation for Carbon Fabric-PVC Foam Sandwich
Structures during Forming (Paper No. 63)
Seung Hwan Chang
Chung-Ang University, Korea
Bending Characteristics of
Carbon Fabric-Polymeric/Metallic Foam Sandwich Structures (Paper
No. 62)
Seong Sik Cheon, Tae Seong Jang, Seung Hwan Chang
Kongju National University/Satellite Technology Research Center/Chung-Ang
University, Korea |
| X Chapeleau |
Mechanical
Response of a Fiber Bragg Grating Sensor in a Non-uniform Stress
Field (Paper No. 99)
P Casari, X Chapeleau, D Leduc
GeM, Nantes, France |
| N Chau |
Evaluation
of the Exchange Magnetic Coupling in Nanocomposite Magnetic
Materials (Paper No.14 )
M-H Phan, H-X Peng, M R Wisnom, S-C Yu, N Chau
University of Bristol, UK/ Chungbuk National University, Korea/National
University of Hanoi, Vietnam |
| Seong Sik Cheon |
Bending
Characteristics of Carbon Fabric-Polymeric/Metallic Foam Sandwich
Structures (Paper No. 62)
Seong Sik Cheon, Tae Seong Jang, Seung Hwan
Chang
Kongju National University/Satellite Technology Research Center/Chung-Ang
University, Korea |
| D A Perez Ciurezu |
Measurement
of Meso-scale Deformations for Modelling Textile Composites
(Paper No. 75)
P Potluri, D A Perez Ciurezu
UMIST, UK |
| F Collombet |
Multi-instrumented Technological
Demonstrator: a Multiscale Study of Composite Structures (Paper
No. 107)
M Mulle, F Collombet, B Trarieux, J-N Périé,
Y-H Grunevald
LGMT/DDL Consultants, FRANCE |
| J Collrep |
Industrialised
Shearography Testing on Aircraft Composites in Combination with
3D Imaging and Defect Location (Paper No. 98)
J Collrep, R Berger
nterferometry, Steinbichler Optotechnik GmbH |
| F Colpo |
Transverse
Evolution of the Residual Stresses in Notched Epoxy Cylinders
using the OLCR Technique and Embedded FBG Sensors (Paper No.
38)
F Colpo, L Humbert, J Botsis
Swiss Federal Institute of Technology |
| J Cook |
Design
and Failure of Materials Systems under Multi-Axial Loads (Paper
No. 15)
J Cook, C Williamson
QinetiQ, UK |
| J Costa |
A
Continuum Damage Model for the Simulation of Delamination under
Variable Mode Ratio in Composite Materials (Paper No. 48)
A Turon, P P Camanho, J Costa, C G Davila
Universitat de Girona, Spain/ Universidade do Porto, Portugal/NASA
Langley, USA |
| J Cugnoni |
A
Mixed Numerical-Experimental Identification Method for Evaluating
the Constitutive Parameters of Composite Laminated Shells (Paper
No. 58)
J Cugnoni, T Gmur, A Schorderet
Swiss Federal Institute of Technology |
| A M Cuhna |
Modelling
the Thermoelastic Properties of Short Fibre Composites with
Anisotropic Phases (Paper No. 17)
P Hine, C D Price, A M Cuhna, I M Ward
University of Leeds, UK/ Universidade Do Minho, Portugal |
| H Cuyperes |
Durability
of Glass Fibre Reinforced Composites Experimental Methods and
Results (Paper No. 40)
H Cuyperes, J Wastiels, E de Bolster, G Moselmans,
M Alshaaer
Vrije University of Brussels, Belgium |
| J P da Costa |
Fibre
Orientation Measurements in Composite Materials (Paper No. 28)
R Blanc, J P da Costa, C Germain, P Baylou,
M Cataldi
ENSEIRB, ENITAB, France
An Image Analysis Approach
for the Structural Characterisation of Pyrocarbons (Paper No.
29)
J P da Costa, C Germain, P Baylou, M Cataldi
ENSEIRB, ENITAB, France |
| O S David-West |
The
Effect of Ply Orientation on the Peak and Delamination Threshold
Loads of CFRP Composite Plates (Paper No. 45)
O S David-West, D H Nash, W M Banks
University of Strathclyde, UK |
| Peter Davies |
Testing
of Marine Composites: From Materials to Structures
Dr Peter Davies
IFREMER, France
Characterization of
Manufacturing Residual Stresses in Wound Composite Tubes (Paper
No. 95)
P Casari, F Jacquemin, P Davies
GeM, Nantes, France |
| C G Davila |
Failure
Criteria for Prediction of Transverse Matrix Cracking in Composites
(Paper No. 4)
P P Camanho, C G Davila
DEMEGI, Portugal
A Continuum Damage Model for
the Simulation of Delamination under Variable Mode Ratio in
Composite Materials (Paper No. 48)
A Turon, P P Camanho, J Costa, C G Davila
Universitat de Girona, Spain/ Universidade do Porto, Portugal/NASA
Langley, USA |
| M V Donadon |
A
3-D Micromechanical Model for Predicting the Elastic Behaviour
of Woven Fabrics (Paper No.6 )
M V Donadon, J M Hodgkinson, B G Falzon, L
Ianucci
Imperial College, UK |
| G Donzella |
Fatigue
Damage Analysis of a Steel-Composite Hybrid Pin (Paper No. 47)
A Avanzini, G Donzella, A Mazzu, V Zacche
University of Brescia, Italy |
| B W Drinkwater |
Intralaminar Fracture in CFRP Laminates
(Paper No.51)
N Vrellos, S L Ogin, P A Smith, N Balthi, F J Guild, B
W Drinkwater
University of Surrey, University of Bristol, UK |
| H Drobez |
Composite
Deformation Controlled with a Source of Heat (Paper No. 84)
H Drobez, G L Hostis, F Laurent, B Durand,
G Meyer
CETIM/CRNS Mulhouse, France |
| J M Dulieu-Barton |
Quantitative
Thermoelastic Stress Analysis of Laminated Composite Components
(Paper No. 90)
J S Earl, J M Dulieu-Barton
University of Southampton, UK |
| F P E Dunne |
Extracting
Matrix Creep Parameters for Modelling the Consolidation of Matrix-
Coated Fibre Composites (Paper No. 12)
H-X Peng, M R Wisnom, F P E Dunne, P S Grant,
B Cantor
University of Bristol /University of Oxford /University of York,
UK |
| B Durand |
Composite
Deformation Controlled with a Source of Heat (Paper No. 84)
H Drobez, G L Hostis, F Laurent, B Durand,
G Meyer
CETIM/CRNS Mulhouse, France |
|
|
A
- B | C - D | E-
F | G - H
| I - J | K
- L | M - N | O
- P | Q - R | S
- T | U - V | W
- Z |
|
| J S Earl |
Quantitative
Thermoelastic Stress Analysis of Laminated Composite Components
(Paper No. 90)
J S Earl, J M Dulieu-Barton
University of Southampton, UK |
| N Ersoy |
Tests
to Measure the Material Properties Relevant to the Modelling
of Process Induced Deformations of Composite Parts (Paper No.
42)
N Ersoy, T Gartska, K Potter, M R Wisnom
University of Bristol, UK |
| B G Falzon |
A
3-D Micromechanical Model for Predicting the Elastic Behaviour
of Woven Fabrics (Paper No.6 )
M V Donadon, J M Hodgkinson, B G Falzon, L
Ianucci
Imperial College, UK |
| I R Farrow |
Methods
of Monitoring Fatigue Damage under Variable Amplitude Loading
in CFRP Composites (Paper No. 20)
M Bourchak, I R Farrow, I P Bond
University of Bristol, UK |
| P Feissel |
Identification
of a Delay-Damaged Mesomodel for the Localization and Rupture
of Composites: Feasibility and Identification Strategy (Paper
No. 104)
P Feissel, O Allix, P Thevenet
Laboratoire de Mecanique et Technologie, France |
| R Ferguson |
Large
Scale Composite Testing at AUK (Paper No. 109)
R Ferguson
Airbus UK
Effect of Local Constraint
on Measured Bearing Stress in Carbon/Epoxy Laminate (Paper No.
100)
R Ferguson
Airbus UK |
| G F Fernando |
Strain
Monitoring of Smart Concrete Cylinders with Overwrap Composite
Materials using Fibre Optic Sensors (Paper No. 111)
J S Leng, D Winter, R A Barnes, G C Mays, G F Fernando
Cranfield University, Shrivenham, UK |
| M Fert |
An
Investigation of the Pull-Out and Shear-Out Processes in Z-Pin
Reinforced Laminates (Paper No. 74)
M Fert, P Robinson, D Hitchings
Imperial College, UK |
| J Fitoussi |
Multiscale Modelling of the Strain
Rate Dependent Damage in Sheet Moulding Compound Composites
(Paper No. 85)
F Meraghni, Z Jendli, J Fitoussi, D Baptiste
ENSAM Chalons en Champagne/ENSAM Paris, France |
| M Fouinneteau |
Failure
and Impact Modelling of Braided Fabric Reinforced Composites
(Paper No. 27)
M Fouinneteau, A K Pickett
Cranfield University, UK |
|
|
A
- B | C - D | E-
F | G
- H | I -
J | K - L |
M - N | O - P | Q
- R | S - T | U
- V | W - Z |
|
| A Gagel |
On
the Relation between Crack Densities, Stiffness Degradation,
and Surface Temperature Distribution of Tensile Fatigue Loaded
Glass-Fibre Non-Crimp-Fabric Reinforced Epoxy (Paper No. 70)
A Gagel, D Lange, K Schulte
Technical University Hamburg/Harburg, Germany |
| H Gagnaire |
Identification
of Residual Strain and Stress in Cross-ply Laminate by using
Embedded Fibre Bragg Sensor (Paper No. 114)
S Vacher, J Molimard, H Gagnaire, A Vautrin
Université Jean Monnet, France |
| U Galvanetto |
Computational
Modelling of Fatigue-Driven Delamination (Paper No.39)
U Galvanetto, P Robinson
Imperial College, UK |
| T Gartska |
Tests
to Measure the Material Properties Relevant to the Modelling
of Process Induced Deformations of Composite Parts (Paper No.
42)
N Ersoy, T Gartska, K Potter, M R Wisnom
University of Bristol, UK |
| C Germain |
Fibre
Orientation Measurements in Composite Materials (Paper No. 28)
R Blanc, J P da Costa, C Germain, P Baylou,
M Cataldi
ENSEIRB, ENITAB, France
An Image Analysis Approach
for the Structural Characterisation of Pyrocarbons (Paper No.
29)
J P da Costa, C Germain, P Baylou, M Cataldi
ENSEIRB, ENITAB, France |
| T Gmur |
Residual
Strain Development in Laminated Thermoplastic Composites Measured
using Fibre Bragg Grating Sensors (Paper No. 53)
L Sorensen, T Gmur, J Botsis
Swiss Federal Institute of Technology
A Mixed Numerical-Experimental
Identification Method for Evaluating the Constitutive Parameters
of Composite Laminated Shells (Paper No. 58)
J Cugnoni, T Gmur, A Schorderet
Swiss Federal Institute of Technology |
| M R L Gower |
Towards
a Standard Qualification Plan (SQP) for Composite Materials
(Paper No. 96)
M R L Gower, G D Sims
National Physical Laboratory, UK |
| P S Grant |
Extracting
Matrix Creep Parameters for Modelling the Consolidation of Matrix-
Coated Fibre Composites (Paper No. 12)
H-X Peng, M R Wisnom, F P E Dunne, P S Grant,
B Cantor
University of Bristol /University of Oxford /University of York,
UK |
| M Grédiac |
Identification
of the Elastic Constants of Composite Materials using Deflectometry
(Paper No. 102)
S Avril, M Grédiac, F Pierron, Y Surrel,
E Toussaint
LMPF/LERMES/CNRS-LM3, France
Experimental Investigation
of Composite Patches with a Full-Field Measurement Method (Paper
No. 11)
J-D Mathias, X Balandraud, M Grediac
French Institute for Advanced Mechanics/LERMES, Blaise Pascal
University, France |
| B Green |
Tensile
Scaling Effects in Notched Composites (Paper No. 19)
B Green, M R Wisnom, S R Hallett
University of Bristol, UK |
| Y-H Grunevald |
Multi-instrumented Technological
Demonstrator: a Multiscale Study of Composite Structures (Paper
No. 107)
M Mulle, F Collombet, B Trarieux, J-N Périé, Y-H
Grunevald
LGMT/DDL Consultants, FRANCE |
| F J Guild |
Intralaminar Fracture in CFRP Laminates
(Paper No.51)
N Vrellos, S L Ogin, P A Smith, N Balthi, F J Guild,
B W Drinkwater
University of Surrey, University of Bristol, UK
Influence of a Near Free Edge on the Impact of Thick CFRP Panels
(Paper No. 30)
C Breen, F Guild, M Pavier
University of Bristol, UK |
| C R Gutierrez |
Probabilistic
Method to Define a Development Test Campaign in the Engineering
Process (Paper No. 26)
C R Gutierrez
Bóreas Engineering & System, Madrid, Spain |
| S J Hallett |
Generation
of Design Allowables for Composite Materials at Airbus UK (Paper
No. 110)
S J Hallett
Airbus UK |
| S R Hallett |
Tensile
Scaling Effects in Notched Composites (Paper No. 19)
B Green, M R Wisnom, S R Hallett
University of Bristol, UK
Size Effects in Unidirectional
and Quasi-isotropic Composites Loaded in Tension (Paper No.
65)
B Khan, K Potter, S R Hallett, M R Wisnom
University of Bristol, UK
|
| Y Hamaguchi |
Damage
Extension and Failure Behaviour of CFRP Specimens in Open Hole
Compression Tests and Analytical Simulation (Paper No. 91)
T Kato, T Ishikawa, Y Hamaguchi, N Shikata,
G Ben
Japan Aerospace Exploration Agency/ Nihon University, Japan
Impact Damage and CAI Strength
of MR50K/PET15 Carbon/Tough-Polyimide Composite Material (Paper
No.69)
H Katoh, T Shimokawa, A Ueda, Y Hamaguchi
Japan Exploration Agency/Tokyo Metropolitan Institute of Technology
|
| G W Han |
Synthesis
of Al2O3/Al Co-continuous Composite by Reactive Melt Infiltration
(Paper No. 116)
C.M.L. Wu and G W Han
City University of Hong Kong |
| F Hild |
Identification
of Elastic Properties of a Ceramic-based Joint using Kinematic
Fields determined by Digital Image Correlation (Paper No. 103)
M Puyo-Pain, F Hild, J Lamon
Universite Bordeaux/Universite Paris, France |
| M Hill |
Investigation of Parameters Dictating
Damage Characteristics in Composite Honeycomb Sandwich Panels
(Paper No. 113)
G Zhou, M Hill, N Hookham
Loughborough University, UK |
| P Hine |
Modelling
the Thermoelastic Properties of Short Fibre Composites with
Anisotropic
Phases (Paper No. 17)
P Hine, C D Price, A M Cuhna, I M Ward
University of Leeds, UK/ Universidade Do Minho, Portugal |
| T Hirogaki |
Development
of Design System for FRP Gears for Power Transmissions (Paper
No.64 )
T Hirogaki, E Aoyama, T Katayama, K Sugimura,
Y Yagura
Doshisha University/ Ishida Co Ltd, Japan |
| D Hitchings |
An
Investigation of the Pull-Out and Shear-Out Processes in Z-Pin
Reinforced Laminates (Paper No. 74)
M Fert, P Robinson, D Hitchings
Imperial College, UK |
| C Hochard |
Use
of Full Field Strain Measurements to model the behaviour of
CFRP woven ply
laminates (Paper No. 10)
C Bordreuil, C Hochard, N Lahellec, F Mazerolle
LMA/CNRS, France |
| J M Hodgkinson |
A
3-D Micromechanical Model for Predicting the Elastic Behaviour
of Woven Fabrics (Paper No.6)
M V Donadon, J M Hodgkinson, B G Falzon, L
Ianucci
Imperial College, UK |
| N Hookham |
Investigation of Parameters Dictating
Damage Characteristics in Composite Honeycomb Sandwich Panels
(Paper No. 113)
G Zhou, M Hill, N Hookham
Loughborough University, UK |
| S Horikawa |
Strength
Evaluations for Stitched CFRP Laminates (Paper No. 32)
Y Iawahori, S Horikawa, M Yamamoto, T Ishikawa,
H Fukuda
Japan Aerospace Exploration Agency/ Tokyo University of Science,
Japan |
| G L Hostis |
Composite
Deformation Controlled with a Source of Heat (Paper No. 84)
H Drobez, G L Hostis, F Laurent, B Durand,
G Meyer
CETIM/CRNS Mulhouse, France |
| L Humbert |
Transverse
Evolution of the Residual Stresses in Notched Epoxy Cylinders
using the OLCR Technique and Embedded FBG Sensors (Paper No.
38)
F Colpo, L Humbert, J Botsis
Swiss Federal Institute of Technology |
|
|
A
- B | C - D | E-
F | G - H | I
- J | K -
L | M - N | O
- P | Q - R | S
- T | U - V | W
- Z |
|
| L Iannucci |
Modelling
Delamination in an Explicit FE Code using 3D Decohesion Elements
(Paper No. 93)
S Pinho, L Iannucci, P Robinson
Imperial College, London, UK
A 3-D Micromechanical Model
for Predicting the Elastic Behaviour of Woven Fabrics (Paper
No.6 )
M V Donadon, J M Hodgkinson, B G Falzon, L Ianucci
Imperial College, UK |
| E Iarve |
Mesh
Independent Modelling and Moire Interferometric Examination
of the Accumulation of Damage in Composites with Open-Holes
(Paper No. 61)
D Mollenhauer, E Iarve, R Kim
US AFRL/University of Dayton Research Institute, USA |
| Y Iawahori |
Strength
Evaluations for Stitched CFRP Laminates (Paper No. 32)
Y Iawahori, S Horikawa, M Yamamoto, T Ishikawa,
H Fukuda
Japan Aerospace Exploration Agency/ Tokyo University of Science,
Japan |
| T Ishikawa |
Damage
Extension and Failure Behaviour of CFRP Specimens in Open Hole
Compression Tests and Analytical Simulation (Paper No. 91)
T Kato, T Ishikawa, Y Hamaguchi, N Shikata,
G Ben
Japan Aerospace Exploration Agency/ Nihon University, Japan
Strength Evaluations for Stitched
CFRP Laminates (Paper No. 32)
Y Iawahori, S Horikawa, M Yamamoto, T Ishikawa,
H Fukuda
Japan Aerospace Exploration Agency/ Tokyo University of Science,
Japan |
| W C Jackson |
Measurement
of Fracture Energy for Kink-Band Growth in Sandwich Specimens
(Paper No. 24)
W C Jackson, J G Ratcliffe
US Army Research Laboratory |
| T K Jacobsen |
Strength
Scaling Mechanics of Polymer Composites (Paper No. 37)
T K Jacobsen, B F Sorensen
LM Glasfiber, Riso National Laboratory, Denmark |
| F Jacquemin |
Characterization
of Manufacturing Residual Stresses in Wound Composite Tubes
(Paper No. 95)
P Casari, F Jacquemin, P Davies
GeM, Nantes, France |
| Tae Seong Jang |
Bending
Characteristics of Carbon Fabric-Polymeric/Metallic Foam Sandwich
Structures (Paper No. 62)
Seong Sik Cheon, Tae Seong Jang, Seung Hwan
Chang
Kongju National University/Satellite Technology Research Center/Chung-Ang
University, Korea |
| A Jarneteg |
A
Screening Method for Investigating Fibre Composite Residual
Strength after Impact (Paper No. 33)
A Jarneteg
CSM Materielteknik AB, Sweden |
| Z Jendli |
Multiscale Modelling of the Strain
Rate Dependent Damage in Sheet Moulding Compound Composites
(Paper No. 85)
F Meraghni, Z Jendli, J Fitoussi, D Baptiste
ENSAM Chalons en Champagne/ENSAM Paris, France |
| J Juracka |
Using
3D Fabric on Light Glider Fuselage (Paper No. 16)
J Juracka, J Splichal,
Brno
University of Technology, Czech Republic |
| F R Jones |
Use
of Phase-Stepping Photoelasticity to Measure Interfacial Shear
Stress in Single
Fibre Model Composites (Paper No. 56)
F M Zhao, S A Simon, E A Patterson, R J Young, F R Jones
University of Sheffield/ UMIST, UK |
|
|
A - B | C
- D | E- F | G
- H | I - J | K
- L | M -
N | O - P | Q
- R | S - T | U
- V | W - Z |
|
| T Katayama |
Development
of Design System for FRP Gears for Power Transmissions (Paper
No.64)
T Hirogaki, E Aoyama, T Katayama, K Sugimura,
Y Yagura
Doshisha University/ Ishida Co Ltd, Japan |
| T Kato |
Damage
Extension and Failure Behaviour of CFRP Specimens in Open Hole
Compression Tests and Analytical Simulation (Paper No. 91)
T Kato, T Ishikawa, Y Hamaguchi, N Shikata,
G Ben
Japan Aerospace Exploration Agency/ Nihon University, Japan |
| H Katoh |
Impact
Damage and CAI Strength of MR50K/PET15 Carbon/Tough-Polyimide
Composite Material (Paper No.69)
H Katoh, T Shimokawa, A Ueda, Y Hamaguchi
Japan Exploration Agency/Tokyo Metropolitan Institute of Technology |
| M Kawai |
Off-Axis
Creep Rupture Behaviour of Unidirectional CFRP Laminates at
Elevated Temperature (Paper No. 76)
M Kawai, Y Masuko, T Sagawa
University of Tsukuba, Japan
Off-Axis Fatigue Behaviour of Plain Woven Carbon/Epoxy Laminates
at Room and High Temperatures (Paper No. 77)
M Kawai, T Taniguchi
University of Tsukuba, Japan |
| P Keensei |
Tomography
Based Approach for Finite Element Modelling of Particle Reinforced
Metal-Matrix Composites (Paper No. 22)
P Keensei, H Biermann, A Borbely
Eotvos Lorand University, Hungary/Technische Universitat Freiburg,
Germany |
| B Khan |
Size
Effects in Unidirectional and Quasi-isotropic Composites Loaded
in Tension (Paper No. 65)
B Khan, K Potter, S R Hallett, M R Wisnom
University of Bristol, UK |
| J Kilroy |
Optimisation of the Mechanical Test
Procedure for Testing of Unidirectional Carbon Fibre/Peek Specimens
(Paper No. 83)
J Kilroy, P McDonnell, C O’Bradaigh
Composites Testing Laboratory, Ireland |
| R Kim |
Mesh
Independent Modelling and Moire Interferometric Examination
of the Accumulation of Damage in Composites with Open-Holes
(Paper No. 61)
D Mollenhauer, E Iarve, R Kim
US AFRL/University of Dayton Research Institute, USA |
| C J von Klemperer |
Testing
of Glass-Fibre Reinforced Polymer Composites (Paper No. 1)
N K Sookay, C J von Klemperer, V E Verijenko
University of Natal, South Africa |
| T V Kosmidou |
Effect
of Thermal Cycling on Stiffness and Strength Degradation of
Polymeric Composite Materials (Paper No. 46)
G C Papanicolaou, T C Theodosiou, T V Kosmidou
University of Patras, Greece |
| I Krakovsky |
Modelling
of Effective Dielectric Properties of Composites using Expansion
into Fourier Series and Finite Element Method (Paper No. 44)
F Moravec, I Krakovsky
University of West Bohemia/Charles University, Czech Republic |
| M P Kruijer |
Modelling
of a Steel Reinforced Thermoplastic Pipe (Paper No.23)
M P Kruijer, L Warnet, R Akkerman
University of Twente, Netherlands |
| R Ktishnamurthy |
Modelling
of Left over Strength in Drilling of Composite Laminates (Paper
No. 92)
S K Malhotra, R Ktishnamurthy, J Ramkumar
IIT Madra/IIT Kanpur, India |
| N Lahellec |
Use
of Full Field Strain Measurements to model the behaviour of
CFRP woven ply laminates (Paper No. 10)
C Bordreuil, C Hochard, N Lahellec, F Mazerolle
LMA/CNRS, France |
| J Lamon |
Identification
of Elastic Properties of a Ceramic-based Joint using Kinematic
Fields determined by Digital Image Correlation (Paper No. 103)
M Puyo-Pain, F Hild, J Lamon
Universite Bordeaux/Universite Paris, France |
| D Lange |
On
the Relation between Crack Densities, Stiffness Degradation,
and Surface Temperature Distribution of Tensile Fatigue Loaded
Glass-Fibre Non-Crimp-Fabric Reinforced Epoxy (Paper No. 70)
A Gagel, D Lange, K Schulte
Technical University Hamburg/Harburg, German |
| C Langer |
The
Behaviour of Uncured Prepreg (Paper No. 82)
C Langer, K D Potter
University of Bristol, UK |
| F Laurent |
Composite
Deformation Controlled with a Source of Heat (Paper No. 84)
H Drobez, G L Hostis, F Laurent, B Durand,
G Meyer
CETIM/CRNS Mulhouse, France |
| V P Lawlor |
Experimental
Measurement and Finite Element Analysis of Load Distribution
and Strength in Multi-Bolt Composite Joints with Variable Bolt
Hole Clearances (Paper No. 43)
M A McCarthy, V P Lawlor, W F Stanley, G S
Padhi, C T McCarthy
University of Limerick/ University College Dublin, Ireland |
| D Leduc |
Mechanical
Response of a Fiber Bragg Grating Sensor in a Non-uniform Stress
Field (Paper No. 99)
P Casari, X Chapeleau, D Leduc
GeM, Nantes, France |
| J Lee |
Prediction
of Impact-Induced Fibre Damage in Circular Composites Plates
(Paper No. 21)
J Lee, C Soutis
University of Sheffield, UK |
| J S Leng |
Strain
Monitoring of Smart Concrete Cylinders with Overwrap Composite
Materials using Fibre Optic Sensors (Paper No. 111)
J S Leng, D Winter, R A Barnes, G C Mays, G
F Fernando
Cranfield University, Shrivenham, UK |
| T L Lew |
Neural Network Metamodelling for
Optimisation of Negative Poisson’s Ratio Chiral Honeycomb
(Paper No. 86)
T L Lew, F Scarpa, K Worden
University of Sheffield, UK |
| M J Lodeiro |
Analytical
Models for Assessing Environmental Degradation of Unidirectional
and Cross-Ply Laminates (Paper No. 66)
W R Broughton, M J Lodeiro
National Physical Laboratory, UK |
| S V Lomov |
Progressive
Damage Characterization of Stitched, Bi-Axial, Multi-ply Carbon
Fabric Composites (Paper No. 78)
M Vettori, T Truong Chi, S V Lomov, I Verpoest
University of Parma, Italy/ Katholieke Universiteit Leuven,
Belgium
Strain Fields in the Picture Frame Test (Paper No. 5)
S V Lomov, T Stoilova, I Verpoest
Katholieke Universiteit Leuven, Belgium |
| S A Lurie |
The Application of the Interphase
Model for the Description of the Filled Composite Properties
with Nanoparticles. Identification of the Parameters of the
Model (Paper No.71 )
S A Lurie, N P Tuchkova, V I Zubov
Dorodicyn Computing Centre of the Russian Academy of Science,
Russia |
|
|
A - B | C
- D | E- F | G
- H | I - J | K
- L | M
- N | O
- P | Q - R | S
- T | U - V | W
- Z |
|
| S K Malhotra |
Modelling
of Left over Strength in Drilling of Composite Laminates (Paper
No. 92)
S K Malhotra, R Ktishnamurthy, J Ramkumar
IIT Madra/IIT Kanpur, India |
| A I Marasco |
Mechanical
Properties Balance in Novel Z-pinned Sandwich Panels (Paper
No. 67)
A I Marasco, D D R Cartié, I K Partridge
and A Rezai
Cranfield University/ BAE SYSTEMS ATC Sowerby, Bristol UK |
| Y Masuko |
Off-Axis
Creep Rupture Behaviour of Unidirectional CFRP Laminates at
Elevated Temperature (Paper No. 76)
M Kawai, Y Masuko, T Sagawa
University of Tsukuba, Japan |
| J-D Mathias |
Experimental
Investigation of Composite Patches with a Full-Field Measurement
Method (Paper No. 11)
J-D Mathias, X Balandraud, M Grediac
French Institute for Advanced Mechanics/LERMES, Blaise Pascal
University, France |
| G C Mays |
Strain
Monitoring of Smart Concrete Cylinders with Overwrap Composite
Materials using Fibre Optic Sensors (Paper No. 111)
J S Leng, D Winter, R A Barnes, G C Mays, G
F Fernando
Cranfield University, Shrivenham, UK |
| F Mazerolle |
Use
of Full Field Strain Measurements to model the behaviour of
CFRP woven ply laminates (Paper No. 10)
C Bordreuil, C Hochard, N Lahellec, F Mazerolle
LMA/CNRS, France |
| A Mazzu |
Fatigue
Damage Analysis of a Steel-Composite Hybrid Pin (Paper No. 47)
A Avanzini, G Donzella, A Mazzu, V Zacche
University of Brescia, Italy |
| C T McCarthy |
Experimental
Measurement and Finite Element Analysis of Load Distribution
and Strength in Multi-Bolt Composite Joints with Variable Bolt
Hole Clearances (Paper No. 43)
M A McCarthy, V P Lawlor, W F Stanley, G S Padhi, C
T McCarthy
University of Limerick/ University College Dublin,
Ireland |
| M A McCarthy |
Experimental
Measurement and Finite Element Analysis of Load Distribution
and Strength in Multi-Bolt Composite Joints with Variable Bolt
Hole Clearances (Paper No. 43)
M A McCarthy, V P Lawlor, W F Stanley, G S
Padhi, C T McCarthy
University of Limerick/ University College Dublin, Ireland |
| P McDonnell |
Optimisation of the Mechanical Test
Procedure for Testing of Unidirectional Carbon Fibre/Peek Specimens
(Paper No. 83)
J Kilroy, P McDonnell, C O’Bradaigh
Composites Testing Laboratory, Ireland |
| L N Melin |
Experimental
Determination of Composite In-Plane Shear Properties (Paper
No. 72)
L N Melin, J M Neumeister
Royal Institute of Technology, Sweden |
| F Meraghni |
Multiscale Modelling of the Strain
Rate Dependent Damage in Sheet Moulding Compound Composites
(Paper No. 85)
F Meraghni, Z Jendli, J Fitoussi, D Baptiste
ENSAM Chalons en Champagne/ENSAM Paris, France
Experimental Identification
of a Damage Model for Composites using the Grid Technique
Coupled to the Virtual Fields Method (Paper No. 88)
H Chalal, F Meraghni, S Avril, F Pierron
ENSAM, France |
| G Meyer |
Composite
Deformation Controlled with a Source of Heat (Paper No. 84)
H Drobez, G L Hostis, F Laurent, B Durand, G Meyer
CETIM/CRNS Mulhouse, France |
| S M’Guil |
A Digital Image Analysis for Determining
Mode I and Mode II Stress Intensity Factors (Paper No.55 )
S M’Guil, N Bahlouli, C Husson, S Ahzi
Universite Louis Pasteur/CNRS, France |
| J Mitchel |
An
Experimental Study of the Fracture Behaviour of Stitched RFI
Composites – Evaluation of the Damage Process Zone to
Calibrate a Strain-softening Model (Paper No. 94)
J Mitchell, A Poursartip
University of British Columbia, Vancouver, Canada |
| J Molimard |
Identification
of Residual Strain and Stress in Cross-ply Laminate by using
Embedded Fibre Bragg Sensor (Paper No. 114)
S Vacher, J Molimard, H Gagnaire, A Vautrin
Université Jean Monnet, France
Test to the Identification
of the In-Plane Characteristics of Orthotropic Plates Application
of the Open Hole Tensile (Paper No. 115)
J Molimard, R Le Riche, A Vautrin
SMS/MeM, GDR CNRS & URA CNRS, France
|
| D Mollenhauer |
Comparison
of Moire Inteferometry and Image Correlation Deformation Measurement
Techniques (Paper No. 60)
D Mollenhauer, J Tyson
US AFRL/Trillion Quality Systems, USA
Mesh Independent Modelling
and Moire Interferometric Examination of the Accumulation of
Damage in Composites with Open-Holes (Paper No. 61)
D Mollenhauer, E Iarve, R Kim
US AFRL/University of Dayton Research Institute
USA |
| I Mondragon |
Flexure
Tests for Determining Tensile and Compressive Modulus (Paper
No. 59)
F Mujika, I Mondragon
EUP, Spain |
| F Moravec |
Modelling
of Effective Dielectric Properties of Composites using Expansion
into Fourier Series and Finite Element Method (Paper No. 44)
F Moravec, I Krakovsky
University of West Bohemia/Charles University, Czech Republic |
| G Moselmans |
Durability
of Glass Fibre Reinforced Composites Experimental Methods and
Results (Paper No. 40)
H Cuyperes, J Wastiels, E de Bolster, G Moselmans,
M Alshaaer
Vrije University of Brussels, Belgium |
| R Moulart |
Identification
of the Through-thickness Elastic Constants of Thick Laminated
Tubes using the Virtual Fields Method (Paper No. 89)
R Moulart, S Avril, F Pierron
LMPF-ENSAM, France |
| F Mujika |
Flexure
Tests for Determining Tensile and Compressive Modulus (Paper
No. 59)
F Mujika, I Mondragon
EUP, Spain |
| M Mulle |
Multi-instrumented Technological
Demonstrator: a Multiscale Study of Composite Structures (Paper
No. 107)
M Mulle, F Collombet, B Trarieux, J-N Périé,
Y-H Grunevald
LGMT/DDL Consultants, FRANCE |
| D H Nash |
The
Effect of Ply Orientation on the Peak and Delamination Threshold
Loads of CFRP Composite Plates (Paper No. 45)
O S David-West, D H Nash, W M Banks
University of Strathclyde, UK |
| P Nedwell |
Experimental
Analysis of RC Beams in Flexure Reinforced with CFRP Sheets
(Paper No. 79)
Z J Wu, M Xylouri, P Nedwell
UMIST, UK |
| J M Neumeister |
Experimental
Determination of Composite In-Plane Shear Properties (Paper
No. 72)
L N Melin, J M Neumeister
Royal Institute of Technology, Sweden
A Tensile Setup for the IDNS Composite Interlaminar Shear Test
(Paper No. 73)
K B Petterson, J M Neumeister
Royal Institute of Technology, Sweden |
| G Nicoletto |
Damage Monitoring in Woven Composites
Laminates Using the DC Electrical Method (Paper No. 80)
E Riva, M Vettori, G Nicoletto
Universita di Parma, Italy
3D Finite Element Damage
Analysis of a Twill-weave Lamina Subjected to In-Plane
Shear (Paper No. 81)
G Baruffaldi, E Riva, G Nicoletto
Universita di Parma, Italy |
| G F Nino |
Square
Grid Analysis for Intraply Shear in Thermoformed Thermoplastic
Composites (Paper No. 57)
G F Nino, O K Bergsma, H E N Bersee
TU Delft, Netherlands |
| L-O Nordin |
Identification
of Parameters in Nonlinear Viscoelastic,Nonlinear Viscoplastic
Material Model (Paper No. 112)
J Varna, L-O Nordin
Lulea University of Technology, Sweden |
|
|
A - B | C
- D | E- F | G
- H | I - J | K
- L | M - N | O
- P | Q -
R | S - T | U
- V | W - Z |
|
| C O’Bradaigh |
Optimisation of the Mechanical Test
Procedure for Testing of Unidirectional Carbon Fibre/Peek Specimens
(Paper No. 83)
J Kilroy, P McDonnell, C O’Bradaigh
Composites Testing Laboratory, Ireland |
| S L Ogin |
Intralaminar Fracture in CFRP Laminates
(Paper No.51)
N Vrellos, S L Ogin, P A Smith, N Balthi, F
J Guild, B W Drinkwater
University of Surrey, University of Bristol, UK |
| G S Padhi |
Experimental
Measurement and Finite Element Analysis of Load Distribution
and Strength in Multi-Bolt Composite Joints with Variable Bolt
Hole Clearances (Paper No. 43)
M A McCarthy, V P Lawlor, W F Stanley, G S Padhi,
C T McCarthy
University of Limerick/ University College Dublin, Ireland |
| J Pang |
Development
and Evaluation of Self Repairing Concepts for Composite Materials
(Paper No. 9)
J Pang, I P Bond
University of Bristol, UK |
| G C Papanicolaou |
Effect
of Thermal Cycling on Stiffness and Strength Degradation of
Polymeric Composite Materials (Paper No. 46)
G C Papanicolaou, T C Theodosiou,
T V Kosmidou, University of Patras, Greece |
| I K Partridge |
Mechanical
Properties Balance in Novel Z-pinned Sandwich Panels (Paper
No. 67)
A I Marasco, D D R Cartié, I K Partridge
and A Rezai
Cranfield University/ BAE SYSTEMS ATC Sowerby, Bristol UK |
| E A Patterson |
Use
of Phase-Stepping Photoelasticity to Measure Interfacial Shear
Stress in Single Fibre Model Composites (Paper No. 56)
F M Zhao, S A Simon, E A Patterson, R J Young,
F R Jones
University of Sheffield/ UMIST, UK |
| M Pavier |
Influence
of a Near Free Edge on the Impact of Thick CFRP Panels (Paper
No. 30)
C Breen, F Guild, M Pavier
University of Bristol, UK |
| H-X Peng |
Extracting
Matrix Creep Parameters for Modelling the Consolidation of Matrix-
Coated Fibre Composites (Paper No. 12)
H-X Peng, M R Wisnom, F P E Dunne, P S Grant,
B Cantor
University of Bristol /University of Oxford /University of York,
UK
Evaluation of the Exchange
Magnetic Coupling in Nanocomposite Magnetic Materials (Paper
No.14 )
M-H Phan, H-X Peng, M R Wisnom, S-C Yu, N Chau
University of Bristol, UK/ Chungbuk National University, Korea/National
University of Hanoi, Vietnam |
| J-N Périé |
Multi-instrumented Technological
Demonstrator: a Multiscale Study of Composite Structures (Paper
No. 107)
M Mulle, F Collombet, B Trarieux, J-N Périé,
Y-H Grunevald
LGMT/DDL Consultants, FRANCE |
| K B Petterson |
A
Tensile Setup for the IDNS Composite Interlaminar Shear Test
(Paper No. 73)
K B Petterson, J M Neumeister
Royal Institute of Technology, Sweden |
| M-H Phan |
Evaluation
of the Exchange Magnetic Coupling in Nanocomposite Magnetic
Materials (Paper No.14)
M-H Phan, H-X Peng, M R Wisnom, S-C Yu, N Chau
University of Bristol UK/ Chungbuk National University, Korea/National
University of Hanoi, Vietnam |
| A K Pickett |
Failure
and Impact Modelling of Braided Fabric Reinforced Composites
(Paper No. 27)
M Fouinneteau, A K Pickett
Cranfield University, UK |
| F Pierron |
Experimental
Identification of a Damage Model for Composites using the Grid
Technique Coupled to the Virtual Fields Method (Paper No. 88)
H Chalal, F Meraghni, S Avril, F Pierron
ENSAM, France
Identification of the
Through-thickness Elastic Constants of Thick Laminated Tubes
using the Virtual Fields Method (Paper No. 89)
R Moulart, S Avril, F Pierron
LMPF-ENSAM
France Identification of
the Through-thickness Identification of the Elastic Constants
of Composite Materials using Deflectometry (Paper No. 102)
S Avril, M Grédiac, F Pierron, Y Surrel,
E Toussaint
LMPF/LERMES/CNRS-LM3, France |
| S Pinho |
Modelling
Delamination in an Explicit FE Code using 3D Decohesion Elements
(Paper No. 93)
S Pinho, L Iannucci, P Robinson
Imperial College, London, UK |
| P Potluri |
Measurement
of Meso-scale Deformations for Modelling Textile Composites
(Paper No. 75)
P Potluri, D A Perez Ciurezu
UMIST, UK |
| K Potter |
Size
Effects in Unidirectional and Quasi-isotropic Composites Loaded
in Tension (Paper No. 65)
B Khan, K Potter, S R Hallett, M R Wisnom
University of Bristol, UK
The Video Gauge - A New Tool
for Simple and Accurate Measurement of Complex Composite Properties
(Paper No. 41)
K Potter, C Setchell
University of Bristol, UK
The Behaviour of Uncured Prepreg
(Paper No. 82)
C Langer, K D Potter
University of Bristol, UK
Tests to Measure the
Material Properties Relevant to the Modelling of Process Induced
Deformations of Composite Parts (Paper No. 42)
N Ersoy, T Gartska, K Potter, M R Wisnom
University of Bristol, UK |
| A Poursartip |
An
Experimental Study of the Fracture Behaviour of Stitched RFI
Composites – Evaluation of the Damage Process Zone to
Calibrate a Strain-softening Model (Paper No. 94)
J Mitchell, A Poursartip
University of British Columbia, Vancouver, Canada |
| C D Price |
Modelling
the Thermoelastic Properties of Short Fibre Composites with
Anisotropic Phases (Paper No. 17)
P Hine, C D Price, A M Cuhna, I M Ward
University of Leeds, UK/ Universidade Do Minho, Portugal |
| M Puyo-Pain |
Identification
of Elastic Properties of a Ceramic-based Joint using Kinematic
Fields determined by Digital Image Correlation (Paper No. 103)
M Puyo-Pain, F Hild, J Lamon
Universite Bordeaux/Universite Paris, France |
|
|
A - B | C
- D | E- F | G
- H | I - J | K
- L | M - N | O
- P | Q
- R | S -
T | U - V | W
- Z |
|
| Z Racz |
Analysing
the Flexural Strength Properties of Unidirectional Carbon/Epoxy
omposites (Paper No.50)
Z Racz, Z L Simon, L M Vas
Budapest University of Technology and Economics, Hungary |
| J G Ratcliffe |
Measurement
of Fracture Energy for Kink-Band Growth in Sandwich Specimens
(Paper No. 24)
W C Jackson, J G Ratcliffe
US Army Research Laboratory |
| A Rezai |
Mechanical
Properties Balance in Novel Z-pinned Sandwich Panels (Paper
No. 67)
A I Marasco, D D R Cartié, I K Partridge and A
Rezai
Cranfield University/ BAE SYSTEMS ATC Sowerby, Bristol UK |
| R Le Riche |
Application
of the Open Hole Tensile Test to the Identification of the In-Plane
Characteristics of Orthotropic Plates (Paper No. 115)
J Molimard, R Le Riche, A Vautrin
SMS/MeM, GDR CNRS & URA CNRS, France |
| E Riva |
Damage Monitoring in Woven Composites
Laminates Using the DC Electrical Method (Paper No. 80)
E Riva, M Vettori, G Nicoletto
Universita di Parma, Italy
3D Finite Element Damage
Analysis of a Twill-weave Lamina Subjected to In-Plane Shear
(Paper No. 81)
G Baruffaldi, E Riva, G Nicoletto
Universita di Parma, Italy |
| P Robinson |
Computational
Modelling of Fatigue-Driven Delamination (Paper No.39)
U Galvanetto, P Robinson
Imperial College, UK
An Investigation of the Pull-Out
and Shear-Out Processes in Z-Pin Reinforced Laminates (Paper
No. 74)
M Fert, P Robinson, D Hitchings
Imperial College, UK
Modelling Delamination
in an Explicit FE Code using 3D Decohesion Elements (Paper No.
93)
S Pinho, L Iannucci, P Robinson
Imperial College, London, UK |
|
|
A - B | C
- D | E- F | G
- H | I - J | K
- L | M - N | O
- P | Q - R | S
- T | U -
V | W - Z |
|
| T Sagawa |
Off-Axis
Creep Rupture Behaviour of Unidirectional CFRP Laminates at
Elevated Temperature (Paper No. 76)
M Kawai, Y Masuko, T Sagawa
University of Tsukuba, Japan |
| F Scarpa |
Neural Network Metamodelling for
Optimisation of Negative Poisson’s Ratio Chiral Honeycomb
(Paper No. 86)
T L Lew, F Scarpa, K Worden
University of Sheffield, UK |
| A Schorderet |
A
Mixed Numerical-Experimental Identification Method for Evaluating
the Constitutive Parameters of Composite Laminated Shells (Paper
No. 58)
J Cugnoni, T Gmur, A Schorderet
Swiss Federal Institute of Technology |
| K Schulte |
On
the Relation between Crack Densities, Stiffness Degradation,
and Surface Temperature Distribution of Tensile Fatigue Loaded
Glass-Fibre Non-Crimp-Fabric Reinforced Epoxy (Paper No. 70)
A Gagel, D Lange, K Schulte
Technical University Hamburg/Harburg, Germany |
| C Setchell |
The
Video Gauge - A New Tool for Simple and Accurate Measurement
of Complex Composite Properties (Paper No. 41)
K Potter, C Setchell
University of Bristol, UK |
| R A Shenoi |
Deformation
and Fracture of Unidirectional GFR Composites at High Strain
Rate Tension (Paper No. 52)
G Makarov, W Wang, R A Shenoi
University of Southampton, UK |
| N Shikata |
Damage
Extension and Failure Behaviour of CFRP Specimens in Open Hole
Compression Tests and Analytical Simulation (Paper No. 91)
T Kato, T Ishikawa, Y Hamaguchi, N Shikata,
G Ben
Japan Aerospace Exploration Agency/ Nihon University, Japan |
| T Shimokawa |
Impact
Damage and CAI Strength of MR50K/PET15 Carbon/Tough-Polyimide
Composite Material (Paper No.69)
H Katoh, T Shimokawa, A Ueda, Y Hamaguchi
Japan Exploration Agency/Tokyo Metropolitan Institute of Technology |
| G D Sims |
Towards
a Standard Qualification Plan (SQP) for Composite Materials
(Paper No. 96)
M R L Gower, G D Sims
National Physical Laboratory, UK |
| S A Simon |
Use
of Phase-Stepping Photoelasticity to Measure Interfacial Shear
Stress in Single Fibre Model Composites (Paper No. 56)
F M Zhao, S A Simon, E A Patterson, R J Young,
F R Jones
University of Sheffield/ UMIST, UK |
| Z L Simon |
Analysing
the Flexural Strength Properties of Unidirectional Carbon/Epoxy
Composites (Paper No.50)
Z Racz, Z L Simon, L M Vas
Budapest University of Technology and Economics, Hungary |
| P A Smith |
Intralaminar Fracture in CFRP Laminates
(Paper No.51)
N Vrellos, S L Ogin, P A Smith, N Balthi, F
J Guild, B W Drinkwater
University of Surrey, University of Bristol, UK |
| N K Sookay |
Testing
of Glass-Fibre Reinforced Polymer Composites (Paper No. 1)
N K Sookay, C J von Klemperer, V E Verijenko
University of Natal, South Africa |
| B F Sorensen |
Strength
Scaling Mechanics of Polymer Composites (Paper No. 37)
T K Jacobsen, B F Sorensen
LM Glasfiber Riso National Laboratory, Denmark |
| L Sorensen |
Residual
Strain Development in Laminated Thermoplastic Composites Measured
using Fibre Bragg Grating Sensors (Paper No. 53)
L Sorensen, T Gmur, J Botsis
Swiss Federal Institute of Technology |
| C Soutis |
Prediction
of Impact-Induced Fibre Damage in Circular Composites Plates
(Paper No. 21)
J Lee, C Soutis
University of Sheffield, UK |
| J Splichal |
Using
3D Fabric on Light Glider Fuselage (Paper No. 16)
J Juracka, J Splichal
Brno University of Technology, Czech Republic |
| W F Stanley |
Experimental
Measurement and Finite Element Analysis of Load Distribution
and Strength in Multi-Bolt Composite Joints with Variable Bolt
Hole Clearances (Paper No. 43)
M A McCarthy, V P Lawlor, W F Stanley, G S
Padhi, C T McCarthy
University of Limerick/ University College Dublin, Ireland |
| T Stoilova |
Strain Fields in the Picture Frame
Test (Paper No. 5)
S V Lomov, T Stoilova, I Verpoest
Katholieke Universiteit Leuven, Belgium |
| K Sugimura |
Development
of Design System for FRP Gears for Power Transmissions (Paper
No.64)
T Hirogaki, E Aoyama, T Katayama, K Sugimura,
Y Yagura
Doshisha University/ Ishida Co Ltd, Japan |
| Prof CT Sun |
Novel
Methods for Testing and Modelling Composite Materials and Laminates
Prof CT Sun
Purdue University, USA |
| Prof Yves Surrel |
Full-field
Optical Methods for Mechanical Engineering: Essential Concepts
to find One’s Way
Prof Yves Surrel
CNAM, Paris
Identification of the Elastic
Constants of Composite Materials using Deflectometry (Paper
No. 102)
S Avril, M Grédiac, F Pierron, Y Surrel,
E Toussaint
LMPF/LERMES/CNRS-LM3, France |
| T Taniguchi |
Off-Axis
Fatigue Behaviour of Plain Woven Carbon/Epoxy Laminates at Room
and High Temperatures (Paper No. 77)
M Kawai, T Taniguchi
University of Tsukuba, Japan |
| P Thevenet |
Identification
of a Delay-Damaged Mesomodel for the Localization and Rupture
of Composites: Feasibility and Identification Strategy (Paper
No. 104)
P Feissel, O Allix, P Thevenet
Laboratoire de Mecanique et Technologie, France |
| E Toussaint |
Identification
of the Elastic Constants of Composite Materials using Deflectometry
(Paper No. 102)
S Avril, M Grédiac, F Pierron, Y Surrel, E Toussaint
LMPF/LERMES/CNRS-LM3, France |
| B Trarieux |
Multi-instrumented Technological
Demonstrator: a Multiscale Study of Composite Structures (Paper
No. 107)
M Mulle, F Collombet, B Trarieux, J-N Périé,
Y-H Grunevald
LGMT/DDL Consultants, FRANCE |
| T Truong Chi |
Progressive
Damage Characterization of Stitched, Bi-Axial, Multi-ply Carbon
Fabric Composites (Paper No. 78)
M Vettori, T Truong Chi, S V Lomov, I Verpoest
University of Parma, Italy/ Katholieke Universiteit Leuven,
Belgium |
| N P Tuchkova |
The Application of the Interphase
Model for the Description of the Filled Composite Properties
with Nanoparticles. Identification of the Parameters of the
Model (Paper No.71 )
S A Lurie, N P Tuchkova, V I Zubov
Dorodicyn Computing Centre of the Russian Academy of Science,
Russia |
| A Turon |
A
Continuum Damage Model for the Simulation of Delamination under
Variable Mode Ratio in Composite Materials (Paper No. 48)
A Turon, P P Camanho, J Costa, C G Davila
Universitat de Girona, Spain/ Universidade do Porto, Portugal/NASA
Langley, USA |
| G J Turvey |
Characterisation of the Rotational
Stiffness and Strength of Web-Flange Junctions of Pultruded
GRP WF-Sections via Web Bending Tests (Paper No. 3)
G J Turvey and Y. Zhang
University of Lancaster, UK |
| J Tyson |
Comparison
of Moire Inteferometry and Image Correlation Deformation Measurement
Techniques (Paper No. 60)
D Mollenhauer, J Tyson
US AFRL/Trillion Quality Systems, USA |
| T C Theodosiou |
Effect
of Thermal Cycling on Stiffness and Strength Degradation of
Polymeric Composite Materials (Paper No. 46)
G C Papanicolaou, T C Theodosiou, T V Kosmidou
University of Patras, Greece |
|
|
A
- B | C - D | E-
F | G - H | I
- J | K - L |
M - N | O - P | Q
- R | S - T |
U - V
| W - Z |
|
| A Ueda |
Impact
Damage and CAI Strength of MR50K/PET15 Carbon/Tough-Polyimide
Composite Material (Paper No.69)
H Katoh, T Shimokawa, A Ueda, Y Hamaguchi
Japan Exploration Agency/Tokyo Metropolitan Institute of Technology |
| R Unnþórsson |
NDT
methods for Evaluating Carbon Fiber Composites (Paper No. 106)
R Unnþórsson
University of Iceland |
| S Vacher |
Identification
of Residual Strain and Stress in Cross-ply Laminate by using
Embedded Fibre Bragg Sensor (Paper No. 114)
S Vacher, J Molimard, H Gagnaire, A Vautrin
Université Jean Monnet, France |
| J Varna |
Identification
of Parameters in Nonlinear Viscoelastic,Nonlinear Viscoplastic
Material Model (Paper No. 112)
J Varna,
L-O Nordin
Lulea University of Technology, Sweden |
| L M Vas |
Analysing
the Flexural Strength Properties of Unidirectional Carbon/Epoxy
Composites (Paper No.50)
Z Racz, Z L Simon, L M Vas
Budapest University of Technology and Economics, Hungary |
| A Vautrin |
Identification
of Residual Strain and Stress in Cross-ply Laminate by using
Embedded Fibre Bragg Sensor (Paper No. 114)
S Vacher, J Molimard, H Gagnaire, A Vautrin,
Université Jean Monnet, France
Application of the
Open Hole Tensile Test to the Identification of the In-Plane
Characteristics of Orthotropic Plates (Paper No. 115)
J Molimard, R Le Riche, A Vautrin
SMS/MeM, GDR CNRS & URA CNRS, France |
| V E Verijenko |
Testing
of Glass-Fibre Reinforced Polymer Composites (Paper No. 1)
N K Sookay, C J von Klemperer, V E Verijenko
University of Natal, South Africa |
| I Verpoest |
Strain Fields in the Picture Frame
Test (Paper No. 5)
S V Lomov, T Stoilova, I Verpoest
Katholieke Universiteit Leuven, Belgium
Progressive Damage Characterization
of Stitched, Bi-Axial, Multi-ply Carbon Fabric Composites (Paper
No. 78)
M Vettori, T Truong Chi,
S V Lomov, I Verpoest
University of Parma, Italy/ Katholieke Universiteit Leuven,
Belgium |
| M Vettori |
Progressive
Damage Characterization of Stitched, Bi-Axial, Multi-ply Carbon
Fabric Composites (Paper No. 78)
M Vettori, T Truong Chi, S V Lomov, I Verpoest
University of Parma, Italy/ Katholieke Universiteit Leuven,
Belgium
Damage Monitoring in Woven Composites Laminates Using the DC
Electrical Method (Paper No. 80)
E Riva, M Vettori, G Nicoletto
Universita di Parma, Italy |
| N Vrellos |
Intralaminar Fracture in CFRP Laminates
(Paper No.51)
N Vrellos, S L Ogin, P A Smith, N Balthi, F
J Guild, B W Drinkwater
University of Surrey, University of Bristol, UK |
|
|
A - B | C
- D | E- F | G
- H | I - J | K
- L | M - N | O
- P | Q - R | S
- T | U - V | W
- Z |
|
| W Wang |
Deformation
and Fracture of Unidirectional GFR Composites at High Strain
Rate Tension (Paper No. 52)
G Makarov, W Wang, R A Shenoi
University of Southampton, UK |
| I M Ward |
Modelling
the Thermoelastic Properties of Short Fibre Composites with
Anisotropic Phases (Paper No. 17)
P Hine, C D Price, A M Cuhna, I M Ward
University of Leeds, UK/ Universidade Do Minho, Portugal |
| L Warnet |
Modelling
of a Steel Reinforced Thermoplastic Pipe (Paper No.23)
M P Kruijer, L Warnet, R Akkerman
University of Twente, Netherlands |
| J Wastiels |
Durability
of Glass Fibre Reinforced Composites Experimental Methods and
Results (Paper No. 40)
H Cuyperes, J Wastiels, E de Bolster, G Moselmans,
M Alshaaer
Vrije University of Brussels, Belgium |
| C Williamson |
Design
and Failure of Materials Systems under Multi-Axial Loads (Paper
No. 15)
J Cook, C Williamson
QinetiQ, UK |
| D Winter |
Strain
Monitoring of Smart Concrete Cylinders with Overwrap Composite
Materials using Fibre Optic Sensors (Paper No. 111)
J S Leng, D Winter, R A Barnes, G C Mays, G
F Fernando
Cranfield University, Shrivenham, UK |
| M R Wisnom |
Tensile
Scaling Effects in Notched Composites (Paper No. 19)
B Green, M R Wisnom, S R Hallett
University of Bristol, UK
Evaluation of the Exchange
Magnetic Coupling in Nanocomposite Magnetic Materials (Paper
No.14 )
M-H Phan, H-X Peng, M R Wisnom, S-C Yu, N Chau
University of Bristol, UK/ Chungbuk National University, Korea/National
University of Hanoi, Vietnam
Size Effects in Unidirectional
and Quasi-isotropic Composites Loaded in Tension (Paper No.
65)
B Khan, K Potter, S R Hallett, M R Wisnom
University of Bristol, UK
Extracting Matrix Creep
Parameters for Modelling the Consolidation of Matrix- Coated
Fibre Composites (Paper No. 12)
H-X Peng, M R Wisnom, F P E Dunne, P S Grant,
B Cantor
University of Bristol /University of Oxford /University of York,
UK
Tests to Measure the
Material Properties Relevant to the Modelling of Process Induced
Deformations of Composite Parts (Paper No. 42)
N Ersoy, T Gartska, K Potter, M R Wisnom
University of Bristol, UK |
| K Worden |
Neural Network Metamodelling for
Optimisation of Negative Poisson’s Ratio Chiral Honeycomb
(Paper No. 86)
T L Lew, F Scarpa, K Worden
University of Sheffield, UK |
| C.M.L. Wu |
Synthesis
of Al2O3/Al Co-continuous Composite by Reactive Melt Infiltration
(Paper No. 116)
C M L Wu and G W Han
City University of Hong Kong |
| Z J Wu |
Experimental
Analysis of RC Beams in Flexure Reinforced with CFRP Sheets
(Paper No. 79)
Z J Wu, M Xylouri, P Nedwell
UMIST, UK |
| M Xylouri |
Experimental
Analysis of RC Beams in Flexure Reinforced with CFRP Sheets
(Paper No. 79)
Z J Wu, M Xylouri, P Nedwell
UMIST, UK |
| Y Yagura |
Development
of Design System for FRP Gears for Power Transmissions (Paper
No.64)
T Hirogaki, E Aoyama, T Katayama, K Sugimura, Y Yagura
Doshisha University/ Ishida Co Ltd, Japan |
| M Yamamoto |
Strength
Evaluations for Stitched CFRP Laminates (Paper No. 32)
Y Iawahori, S Horikawa, M Yamamoto, T Ishikawa,
H Fukuda
Japan Aerospace Exploration Agency/ Tokyo University of Science,
Japan |
| R J Young |
Use
of Phase-Stepping Photoelasticity to Measure Interfacial Shear
Stress in Single Fibre Model Composites (Paper No. 56)
F M Zhao, S A Simon, E A Patterson, R J Young,
F R Jones
University of Sheffield/ UMIST, UK |
| S-C Yu |
Evaluation
of the Exchange Magnetic Coupling in Nanocomposite Magnetic
Materials (Paper No.14)
M-H Phan, H-X Peng, M R Wisnom, S-C Yu, N Chau
University of Bristol, UK/ Chungbuk National University, Korea/National
University of Hanoi, Vietnam |
| V Zacche |
Fatigue
Damage Analysis of a Steel-Composite Hybrid Pin (Paper No. 47)
A Avanzini, G Donzella, A Mazzu, V Zacche
University of Brescia, Italy |
| F M Zhao |
Use
of Phase-Stepping Photoelasticity to Measure Interfacial Shear
Stress in Single Fibre Model Composites (Paper No. 56)
F M Zhao,
S A Simon, E A Patterson, R J Young, F R Jones
University of Sheffield/ UMIST, UK |
| G Zhou |
Investigation of Parameters Dictating
Damage Characteristics in Composite Honeycomb Sandwich Panels
(Paper No. 113)
G Zhou, M Hill, N Hookham
Loughborough University, UK |
| V I Zubov |
The Application of the Interphase
Model for the Description of the Filled Composite Properties
with Nanoparticles. Identification of the Parameters of the
Model (Paper No.71 )
S A Lurie, N P Tuchkova, V I Zubov
Dorodicyn Computing Centre of the Russian Academy of Science,
Russia |
| Y. Zhang |
Characterisation of the Rotational
Stiffness and Strength of Web-Flange Junctions of Pultruded
GRP WF-Sections via Web Bending Tests (Paper No. 3)
G.J. Turvey and Y. Zhang
University of Lancaster, UK |
|
|
[an error occurred while processing this directive]
