This section describes which Units you will take in which year of study. It indicates which units are mandatory and where you will be able to choose. The overall pass marks you will need to achieve in order to progress or achieve an award are shown. The full regulations concerning progression and completion are held in the University's Regulations and Code of Practice. Any particular aspects of your programme that are unusual will be highlighted. If any Units are must pass this will be shown below. The linked unit specifications detail any additional requirements.
What do the teaching blocks (TB) mean?
This Integrated Master's programme has been designated as type III: Professional, with a formal period of study in industry, in accordance with the QAA descriptors for Master's programmes. Please see the Regulations and Code of Practice for Taught Programmes for further information on this type of programme.
CENG30021 or CENG30022 are must pass units. For the definition of must pass units please see the Glossary of Terms from Annex 1 to the Regulations and Code of Practice for Taught Programmes at http://www.bristol.ac.uk/esu/assessment/annex/glossary.html
Unit name | Unit code | Credit points | Status | Teaching Block |
---|---|---|---|---|
EITHER | ||||
Research and Development Dissertation | CENG30021 | 40 | Optional | TB-4 |
OR | ||||
Research and Development Project | CENG30022 | 20 | Optional | TB-4 |
MECHANICAL STREAM: Students must take all units on the Mandatory List and 20-40 credits of Elective units depending on selection of Dissertation or Project. Students may exceptionally take 20cp of University Open Units or units owned by the Faculty of Engineering, provided they meet the prerequisites and approval is granted by the Programme Director. | ||||
MECHANICAL STREAM MANDATORY LIST: ALL UNITS TO BE TAKEN | ||||
Behaviour of Dynamic Systems | MENG30006 | 20 | Optional | TB-1 |
Applied Solid Mechanics | MENG30011 | 20 | Optional | TB-1 |
Fluid Mechanics and Heat Transfer | MENG30008 | 20 | Optional | TB-1 |
AEROSPACE STREAM: Students must take all units on the Mandatory List and 20-40 credits of Elective units depending on selection of Dissertation or Project. Students may exceptionally take 20cp of University Open Units or units owned by the Faculty of Engineering, provided they meet the prerequisites and approval is granted by the Programme Director. | ||||
AEROSPACE STREAM MANDATORY LIST: ALL UNITS TO BE TAKEN. | ||||
Numerical and Simulation Methods for Aerodynamics | AENG30018 | 10 | Optional | TB-1 |
Structures and Materials 3 | AENG31200 | 20 | Optional | TB-4 |
Sensors, Signals and Control | AENG31300 | 20 | Optional | TB-4 |
Aircraft Propulsion | AENG31102 | 10 | Optional | TB-2 |
ELECTIVE LIST: Mechanical and Aerospace streams | ||||
Introduction to Computer Programming | EMAT10007 | 10 | Optional | TB-1 |
Optimisation Theory and Applications | EMAT30670 | 10 | Optional | TB-1 |
Nonlinear Dynamics and Chaos | EMAT33100 | 10 | Optional | TB-1 |
Introduction to Artificial Intelligence | EMAT31530 | 20 | Optional | TB-4 |
CIVIL STREAM: Students must take all units on the Mandatory List and 20-40 credits of Elective units depending on selection of Dissertation or Project. Students may exceptionally take 20cp of University Open Units or Level 6 units owned by the Faculty of Engineering, provided they meet the prerequisites and approval is granted by the Programme Director. | ||||
CIVIL STREAM MANDATORY LIST: ALL UNITS TO BE TAKEN | ||||
Water Engineering | CENG20021 | 20 | Optional | TB-4 |
Advanced Structural Analysis | CENG30010 | 20 | Optional | TB-4 |
Geotechnical Design | CENG30016 | 20 | Optional | TB-4 |
ELECTIVE LIST: Civil stream | ||||
Optimisation Theory and Applications | EMAT30670 | 10 | Optional | TB-1 |
Nonlinear Dynamics and Chaos | EMAT33100 | 10 | Optional | TB-1 |
Introduction to Artificial Intelligence | EMAT31530 | 20 | Optional | TB-4 |
BEng Engineering Design | 120 |
Unit Pass Mark for Undergraduate Programmes:
For details on the weightings for classifying undergraduate degrees, please see the Agreed Weightings, by Faculty, to be applied for the Purposes of Calculating the Final Programme Mark and Degree Classification in Undergraduate Programmes.
For detailed rules on progression please see the Regulations and Code of Practice for Taught Programmes and the relevant faculty handbook.
Please refer to the specific progression/award requirements for programmes with a preliminary year of study, the Gateway programmes and International Foundation programmes.
All undergraduate degree programmes allow the opportunity for a student to exit from a programme with a Diploma or Certificate of Higher Education.
Integrated Master's degrees may also allow the opportunity for a student to exit from the programme with an equivalent Bachelor's degree where a student has achieved 360 credit points, of which 90 must be at level 6, and has successfully met any additional criteria as described in the programme specification.
The opportunities for a student to exit from one of the professional programmes in Veterinary Science, Medicine, and Dentistry with an Award is outlined in the relevant Programme Regulations (which are available as an annex in the Regulations and Code of Practice for Taught Programmes).