This section describes which Units you will take in which year of study. It indicates which units are mandatory and where you will be able to choose. The overall pass marks you will need to achieve in order to progress or achieve an award are shown. The full regulations concerning progression and completion are held in the University's Regulations and Code of Practice. Any particular aspects of your programme that are unusual will be highlighted. If any Units are must pass this will be shown below. The linked unit specifications detail any additional requirements.
What do the teaching blocks (TB) mean?
The maximum period of study for full-time students is 4 years. This catalogue only shows the taught units on the programme and may not show all years of study.
AENGM0007 is a must pass unit. For the definition of must pass units please see the Glossary of Terms from Annex 1 to the Regulations and Code of Practice for Taught Programmes.
Unit name | Unit code | Credit points | Status | Teaching Block |
---|---|---|---|---|
Research Project (Advanced Composites) | AENGM0007 | 60 | Mandatory | AYEAR |
Composites Design and Manufacture Principles | AENGM0025 | 10 | Mandatory | TB-1 |
Advanced Composite Materials | AENGM0040 | 10 | Mandatory | TB-1 |
Principles of Numerical Analysis and Research Software Development | AENGM0071 | 10 | Mandatory | TB-1 |
Sustainable Composite Material | AENGM0051 | 10 | Mandatory | TB-2 |
Composite Products Development and Manufacture | AENGM0055 | 20 | Mandatory | TB-4 |
Mechanics of Composite Materials | AENGM0053 | 10 | Mandatory | TB-1 |
Composite Structures: Design, Build & Test | AENGM0050 | 10 | Mandatory | TB-2 |
Students from a non-engineering background take AENGM0054. Students with an Engineering background take AENGM2200 | ||||
Structural Analysis | AENGM0054 | 10 | Optional | TB-1 |
Advanced Composites Analysis | AENGM2200 | 10 | Optional | TB-2 |
Select at least 20 credit points from this list (up to a maximum of 30 credit points): | ||||
Smart Materials | AENGM0010 | 10 | Optional | TB-2 |
Nanocomposites and Nanoengineering | AENGM0011 | 10 | Optional | TB-2 |
Nature's Materials | AENGM0044 | 10 | Optional | TB-2 |
Imaging for mechanics and non-destructive evaluation of composite structures | AENGM0077 | 10 | Optional | TB-2 |
Subject to CDT Director approval, if only 20 credit points are selected from the list above then select one 10 credit point unit from the list below | ||||
Nonlinear Structures and Structural Stability | AENGM0057 | 10 | Optional | TB-2 |
Aeroelasticity | AENGM0069 | 10 | Optional | TB-2 |
Advanced Techniques in Multi-Disciplinary Design | AENGM2005 | 10 | Optional | TB-2 |
MRes Advanced Composites | 180 |
The assessment of the taught component of a doctoral degree is governed by the Regulations and Code of Practice for Taught Programmes and is assessed separately from the research project. Progression to the research project may be dependent on the successful completion of the taught component - please refer to the relevant handbook for the structure of the particular programme.
The pass mark set by the University for any level 7(M) unit is 50 out of 100.
It may be possible to exit the programme with a taught award. For detailed rules on progression please see the Regulations and Code of Practice for Research Programmes and the relevant faculty handbook.