University home
>
Unit and programme catalogues in 2012/13
>
Unit catalogue
>
Faculty of Engineering
>
Department of Civil Engineering
>
Seismic Analysis 3
Unit information: Seismic Analysis 3 in 2012/13
Please note: you are viewing unit and programme information
for a past academic year. Please see the current academic year for up to date information.
Unit name |
Seismic Analysis 3 |
Unit code |
CENG32400 |
Credit points |
10 |
Level of study |
H/6
|
Teaching block(s) |
Teaching Block 2 (weeks 13 - 24)
|
Unit director |
Professor. Alexander |
Open unit status |
Not open |
Pre-requisites |
Normally the successful completion of appropriate Level 2 Engineering units |
Co-requisites |
None |
School/department |
Department of Civil Engineering |
Faculty |
Faculty of Engineering |
Description including Unit Aims
By the end of this unit, successful students will be able to: understand the fundamentals of dynamic and seismic analysis of single and multi degree of freedom systems; derive the stiffness, load and mass matrices for simple structural finite elements; understand the operation of the important components of a finite element program; understand the characterisation of seismic loads; carry out a static and seismic analysis of a structure using a commercial computer programme.
Aims:
- To introduce the concepts of single degree of freedom and multi-degree of freedom structural dynamics in the context of the analysis of structures subjected to seismic (i.e. earthquake) loading.
- To extend the students knowledge of the Finite Element method by developing a general expression for the stiffness matrix and applying it to in-plane static and dynamic problems.
Intended Learning Outcomes
- understand the fundamentals of the dynamic analysis of single degree of freedom (SDOF) systems; (PLO A1, A2, A4)
- be able to calculate the response of SDOF systems to periodic and non-periodic forcing; (PLO A1, A2, A4)
- understand the concept of generalized coordinates; (PLO A1, A2, A4)
- be able to calculate frequencies of vibration and mode shapes for simple multi-degree of freedom systems and understand how to obtain the response of such systems to seismic and other types of forcing;
- understand the concept of earthquake response spectra and their use in seismic analysis; (PLO A1, A2, A4, B2, B5)
- be able to derive stiffness and mass matrices and load vectors for simple elastic truss and beam elements and to apply the finite element method to simple static and dynamic problems; (PLO A1, A2, A4, B2, B5)
- be able to conduct a seismic response spectrum analysis of a multi degree of freedom system.
Teaching Information
Lectures 20 hours
Assessment Information
Coursework (project) 20%
2 hour exam (May/June) 80%
Reading and References
- A.K.CHOPRA, Dynamics of Structures. (1995) Prentice-Hall Inc.
- R. CLOUGH & J. PENZIEN, Dynamics of Structures. (1993) Mcgrawhill Inc
- D. BECKET & A.A. ALEXANDROU, An Introduction To EC2 Design Of Concrete Structures Including Seismic Action. (1998) SPON.
- D. KEY, Earthquake Design And Practice For Buildings. (1988) Thomas Telford, London.
- S.L. KRAMER, Geotechnical Earthquake Engineering, (1996) Prentice-Hall Inc.
- C. CHATFIELD, The Analysis of Time series, an introduction (1996) Chapman & Hall.
- B.A. BOLT, Earthquakes, (fourth Ed) (1999) W.H.Freeman & Co.
- J.R. MAGUIRE & T.A. WYATT, Dynamics, an introduction for civil and structural engineers. ICE Design and practice Guide. (1999) Thomas Telford Ltd.
- B.O. SKIPP, (ed) Ground dynamics and man made processes. (1998) Thomas Telford Ltd.
- Y.K Cheung, and M.F. Yeo, A practical introduction to finite element analysis.