Presentation Files Page
Return to Attendees Page
here
Please send all updates and comments to Steve Donaldson, as listed in the "Contacts" link.
Monday, Oct 20, 2008
Session 1: Testing 1
Accelerated Composite Moisture Infusion Test and Characterization:
Siva P Pilli, Kevin L Simmons, James D Holbery, Vaithiyalingam Shutthanandan,
(Pacific Northwest National Laboratory, USA / Boeing Company, USA)
pdf file
An Experimental and Numerical Analysis of the V-notched Rail Shear Test to
Measure the Shear Properties of Fiber-Reinforced Polymers:
Essam Totry, Sergio S�daba, Carlos Gonz�lez, Javier Llorca
(Universidad Polit�cnica de Madrid, Spain / Instituto Madrileno de Estudios Avanzados
en Materiales, Spain)
pdf file video1 file video2 file video3 file video4 file video5 file
Clamping Issues in Iosipescu Shear Testing of Composite Laminates:
Jonas M. Neumeister, L. Niklas Melin
(KTH - Royal Institute of Technology, Sweden)
pdf file
Composite Materials Specimen Design for Validation of an Energy-Based
Multi-Axial Characterization Methodology:
Adrian C. Orifici, John G. Michopoulos, Paul A. Lagac�, Israel Herszberg
(Royal Melbourne Institute of Technology, Australia, Cooperative Research Centre for
Advanced Composite Structures Ltd, Australia, U.S. Naval Research Laboratory, USA,
Massachusetts Institute of Technology, USA)
pdf file
Poster Break 1
Identification of the Through-Thickness Shear Modulus of Composites from
Full-Field Surface Deformation Measurements:
F. Pierron, R. Rotinat
(ParisTech Arts et M�tiers, France)
pdf file
Characterization of Dynamic Response of Composite Plates with Embedded
FBG Sensors:
J. Frieden, J. Cugnoni, J. Botsis, Th. Gm�r, D. Coric
(�cole Polytechnique F�d�rale de Lausanne - EPFL, Switzerland)
pdf file
Hertzian Fracture, Kinetic Friction and the Mechanical Impact LOX
Compatibility:
Roger Gerzeski
(Air Force Research Laboratory, USA)
Optimising Materials and Production Modeling for Composite Boat Hull
Structures:
A.J. Sobey, J.I.R. Blake, R.A. Shenoi
(University of Southampton, UK)
pdf file
Effects of Injection Molding Parameters on the Weldline Strength of Thin-Wall
Fiber-Reinforced Thermoplasti
Cheng-Hsien Wu, Ming-Yu Lin
(National Kaohsiung University of Applied Sciences, Taiwan / Da-Yeh University,
Taiwan)
Session 2: Testing 2
Composite Joints and Structures:
Alastair Johnson, Garth Pearce
(German Aerospace Center, Germany / University of New South Wales, Australia)
pdf file
video1 file
video2 file
video3 file
video4 file
video5 file
video6 file
video7 file
video8 file
video9 file
High Strain Rate Tensile Testing of Notched Composites:
Yi Chen, Stephen R. Hallett
(University of Bristol, UK)
pdf file
video1 file
video2 file
video3 file
video4 file
video5 file
Mechanical Tests for FoldCore Base Material Properties:
S. Fischer, K. Drechsler, S. Kilchert, A.F. Johnson
(University of Stuttgart, Germany / German Aerospace Center (DLR), Germany)
pdf file
Sensing strain gradients with embedded Bragg gratings across the width of a
composite laminate:
P. Casari, P. A. Morvan, X. Chapeleau, N. Daher, C. Lupi, D. Leduc.
(University of Nantes, France)
pdf file
Session 3: Fracture
Fracture Analysis for Bondlines and Interfaces of Composite
Structures:
Gerald Mabson
(The Boeing Company, USA)
pdf file
video1 file
video2 file
video3 file
video4 file
video5 file
Modeling R-Curve Toughening Mechanisms with Complex Softening Laws:
Carlos G. D�vila, Cheryl Rose, Pedro P. Camanho
(NASA Langley Research Center, USA / Universidade do Porto, Portugal)
pdf file
Measurement of Cohesive Laws for Delamination of Composites:
Ulf Stigh, Anders Biel, K. Svante Alfredsson
pdf file
(University of Sk�vde, Sweden)
Length of the Cohesive Zone in Delaminated Composite Materials:
Albert Turon, Pedro P. Camanho, Josep Costa, Pere Maim�
(University de Girona, Spain / Universidade do Porto, Portugal)
pdf file
Poster Break 2
Identifying Damage in Thin-Wall Anisotropic Composite Structures by Lamb
Wave Reflection:
A. S. Liberson, T. S. Meyer, M. J. Roemer, G. P. Tandon
(Impact Technologies LLC, USA / University of Dayton Research Institute, USA)
pdf file
Investigation of the Effect of Specimen Width on Open Hole Tensile Strength:
Marco Cheung, Stephen Hallett
(University of Bristol, UK)
pdf file
Test development for adhesively bonded assemblies:
Casari P, Jacquemin F, Bourmaud A, Davies P, Choqueuse D
(University of Nantes, France)
Influence of Underwater Preconditioning of GRP Pipes in Ring Load Creep Tests
Results:
Hugo Faria, Rui M. Guedes, Ant�nio T. Marques
(Instituto de Engenharia Mec�nica e Gest�o Industrial, Portugal / Faculdade de
Engenharia da Universidade do Porto, Portugal)
pdf file
Session 4: Scaling Effects and Joints
Crack Growth in Adhesive Joints in Polymer Matrix Composites: Numerical
Modelling and Experiments:
Bent F. S�rensen, Stergios Goutianos, Torben K. Jacobsen
(The Technical University of Denmark, Denmark / LM Glasfiber A/S, Denmark)
pdf file
Optimal Design of a Composite Scarf Repair Patch under Uniaxial Tension Load:
Tim Breitzman, Greg Schoeppner, Ben Cook, Endel Iarve
(Air Force Research Laboratory, USA / University of Dayton Research Institute, USA)
pdf file
Hybrid Titanium-CFRP Laminates For High-Performance Bolted Joints:
Pedro P. Camanho, Axel Fink, Crist�v�o Cardoso, Andreas Obst
(Universidade do Porto, Portugal / DLR German Aerospace Center, Germany / INEGI �
Instituto de Engenharia Mec�nica e Gest�o Industrial, Portugal / European Space
Agency, The Netherlands)
pdf file
video1 file
video2 file
Progressive Failure Modelling of Composite Laminates Containing Tapered
Holes:
Andrew J. Gunnion, Adrian C. Orifici, Chun H. Wang
(Cooperative Research Centre for Advanced Composite Structures Ltd, Australia / Royal
Melbourne Institute of Technology, Australia / Defence Science and Technology
Organisation, Australia)
pdf file
Tuesday, Oct 21, 2008
Session 5: Textile Composites I
Experimental methodology and FEA for damage studies in
textile composites:
Stepan V. Lomov, Dmitry S. Ivanov, Ignaas Verpoest
(Katholieke Universiteit Leuven, Belgium)
pdf file
Testing and Modeling of Yarn Pullout in Plain Woven Kevlar Fabrics:
Zhaoxu Dong, C.T. Sun
(Purdue University, USA)
pdf file
video1 file
Enhancement of Tow Visualisation in Carbon Composites:
Luke P. Djukic, Israel Herszberg, Greg A. Schoeppner
(The University of New South Wales, Australia / Cooperative Research Centre for
Advanced Composite Structures, Australia / Air Force Research Laboratory, USA)
pdf file
video1 file
video2 file
Experimental Analysis and Modeling of Z-Pinned Joints Under Pull-Out, Shear
and Flexural Loading:
Xavier Toral Vazques, Bruno Castanie, Jean-Jacques Barrau, S�bastien Didierjean
(Universit� de Toulouse, France / EADS IW, France)
pdf file
Poster Break 3
The Development of a Dispersion-Strengthened Tin Composite Using Silica
Nanopowders:
J.S. Jatau, E.I. Mbaya, Y.A. Barau
(Abubakar Tafawa Balewa University, Nigeria)
pdf file
New Method to Real Time Monitoring of Specimens Compliance in Mode II
Delamination Tests:
J. Vicens, J. Costa, J. Renart
(Universitat de Girona, Spain)
pdf file
A Comparison of Moir� Interferometry and Digital Image Correlation:
Ryan Davidson, David Mollenhauer, Anthony Palazotto
(Air Force Institute of Technology, USA / Air Force Research Laboratory, USA)
A Whole-field Measurement Based Identification Procedure for Polymer
Composites:
F. Grytten, R.H. Gaarder, E. Andreassen, E.L. Hinrichsen
(SINTEF Materials and Chemistry, Norway)
pdf file
The Modified Iosipescu Shear Test for Composites � Accuracy and Robustness:
L. Niklas Melin, Jonas M. Neumeister
(KTH - Royal Institute of Technology, Sweden)
Thermo-oxidative Behavior of Laminated Composites:
G.P. Tandon, W.R. Ragland, G.A. Schoeppner
(University of Dayton Research Institute, USA / Air Force Research Laboratory, USA)
Structural-Electric Characterization of a Load Bearing Antenna RF Laminate:
Brian Smyers, William Baron, Joseph Marshall
(Air Force Research Laboratory, USA / Boeing Phantom Works, USA)
pdf file
Session 6: Textile Composites II
Three-dimensional Stress Analysis in Complex Fiber Architecture Composites by
Using Independent Mesh Method:
E.V. Iarve, E. Zhou, T.J. Whitney, D. Mollenhauer
(University of Dayton Research Institute, USA / Air Force Research Laboratory, USA)
pdf file
Characterization of the Microstructure and Deformation of Woven Composites:
Robert J. Young, Stephen J Eichhorn, James A Bennett, Prasad Potluri, Richard J Davies
(University of Manchester, UK / European Synchrotron Radiation Facility, France)
pdf file
video1 file
Identification of Meso Scale Damage Parameters of Carbon-Epoxy Composite:
Dmitry Ivanov, Stepan Lomov, Ignaas Verpoest
(Katholieke Universiteit Leuven, Belgium)
pdf file
Effect of microscopic damage events on static and ballistic impact strength of
triaxial braid composites:
Justin D. Littell, Wieslaw K. Binienda, William A. Arnold, Gary D. Roberts, Robert K.
Goldberg
(The University of Akron, USA / NASA Glenn Research Center, USA)
pdf file
Session 7: Structures
Buckling Strength of Thick Composite Panels in Wind Turbine Blades � Part I:
Effect of Geometrical Imperfections:
Christian Berggreen, Nicholas Tsouvalis, Brian Hayman, Kim Branner
(Technical University of Denmark, Denmark / National Technical University of Athens,
Greece / Det Norske Veritas AS and University of Oslo, Norway)
pdf file
video1 file
Buckling Strength of Thick Composite Panels in Wind Turbine Blades � Part II:
Effect of Delaminations:
Kim Branner, Peter Berring, Christian Berggreen
(Technical University of Denmark, Denmark)
pdf file
video1 file
video2 file
Integrating Materials Modeling Aspects into the Industrial Analysis of
Composite Structures: Stephane Mahdi (Airbus, France)
pdf file
Composite Torsion Catapult Research: A Fun Use for Modern Engineering:
David Mollenhauer, Chase Nessler, Bryan Langley, John Camping
(Air Force Research Laboratory, USA / YUSA Corporation, USA / University of Dayton
Research Institute, USA)
pdf file
video1 file
video2 file
video3 file
video4 file
video5 file
video6 file
video7 file
video8 file
video9 file
video10 file
Session 8: Full Field Techniques
Detecting and Monitoring the Development of Surface Cracks Using the Grid
Method:
S. Fhaikhao, M.R. Wisnom, F. Pierron
(University of Bristol, UK / ParisTech Arts et M�tiers, France)
pdf file
Experimental Aspects of Virtual Tests:
Brian Cox (Teledyne Scientific, USA)
pdf file
Influence of Microstructure Heterogeneities on Free Edge Stress Fields of a
Laminate Using Digital Image Correlation Technique:
P. Grosbras, B. Paluch, M. Brieu, L. Sabatier
(ONERA, France / Laboratoire de M�canique de Lille, France)
pdf file
Meso-Scale Strain Mapping and Strength Predictions in UD Woven Composites:
P. Potluri, A. Manan, J. Stein, R.J. Young, Y.T. Shyng
(University of Manchester, UK)
pdf file
Wednesday, Oct 22, 2008
Session 9: Fatigue and Durability
New Fire Models & Test Methods for Polymer Matrix
Composites:
A.P. Mouritz, S. Feih, Z. Mathys, A.G. Gibson, S.W. Case, B.Y. Lattimer
(Royal Melbourne Institute of Technology, Australia / Defence Science & Technology
Organisation, Australia / Newcastle Univeristy, UK / Virginia Polytechnic Institute and
State University, USA)
pdf file
video1 file
video2 file
Effects of moisture on ageing and debonding in a single fiber composite using
a long FBG sensor and numerical modeling:
J. Botsis, M. Lai, J. Cugnoni, D. Coric
(�cole Polytechnique F�d�rale de Lausanne (EPFL), Switzerland)
pdf file
Damage Tolerance of Composite Laminate subjected to Edge Impact:
A. Malhotra, F.J. Guild
(University of London, UK / University of Bristol, UK)
pdf file
Coupled Evolution of Damage and Oxidation in High Temperature Polymeric
Matrix Composites:
Kishore Pochiraju, Gyaneswar P. Tandon, Gregory Schoeppner
(Stevens Institute of Technology, USA / University of Dayton Research Institute,
University of Dayton Research Institute, USA / Air Force Research Laboratory, USA)
pdf file
Poster Break 4
Mechanical Characterization of Thick 3D Woven E-glass Composite Laminate:
Seung Min Lee, Ozden O. Ochoa, Alexander Bogdanovich, Dmitri Mungalov
(Texas A&M University, Texas, USA / 3TEX Inc., USA)
Environmental Testing on Composites Overwrap Repairs: Effect of Curing on
Durability:
S.H.M. Ramli, K.H.Leong, F. Ahmad, Z. Man
(PETRONAS Research, Malaysia / Universiti Teknologi PETRONAS, Malaysia)
pdf file
Thermal Aging and Fatigue Effect on Resistance to Transverse Cracking:
Janis Varna, Roberts Joffe
(Lulea University of Technology, Sweden)
Design, Testing, and Simulation of Morphing Composites:
Kristen Cable, Jason Hermiller, H. Jerry Qi
(Cornerstone Research Group Inc, USA /University of Colorado, USA)
pdf file
Session 10: Damage Models
Critical Energy Densities of Resin Systems: The Key to Matrix Dominated
Composites Failure:
Leif E. Asp, Janis Varna, Ramesh Talreja
(Swerea SICOMP, Sweden / Lule� University of Technology Sweden / Texas A&M
University, USA)
pdf file
Failure Criterion Development for Composite Materials loaded Transverse to
Fiber Direction:
Dean Foster, G.P. Tandon
(Air Force Research Laboratory, USA / University of Dayton Research Institute, USA)
pdf file
video1 file
Experimental and Numerical Analyses on the Low-Velocity Impact Damage of
Composite Laminates:
C. Lopes, P.P Camanho, Z. G�rdal, P. Maim�
(Universidade do Porto, Portugal / Delft University of Technology, The Netherlands /
Universitat de Girona, Spain)
pdf file
video1 file
video2 file
video2 file
video2 file
Micro-mechanics of Kink-band Formation:
S.T. Pinho, S. Pimenta, P. Robinson
(Imperial College, UK)
pdf file
video1 file
video2 file
video3 file
video4 file
Session 11: Virtual Field/Inverse Methods
Identification of the Local Stiffness Reduction of a Damaged Composite Plate
Using the Virtual Fields Method:
Jin-Hwan Kim, Fabrice Pierron, Michael R. Wisnom
(ENSAM, France / University of Bristol, UK)
pdf file
Identification of Anisotropic Properties from Erroneous Full-field
Measurements:
Tomonari Furukawa, Jan Wei Pan
(University of New South Wales, Australia / Virginia Polytechnic Institute and State
University, USA)
pdf file
video1 file
video2 file
video3 file
video4 file
video5 file
video6 file
video7 file
video8 file
video9 file
video10 file
video11 file
video12 file
video13 file
video14 file
video15 file
An Inverse Method for Determining the Stiffness of Impact damage in
Laminate composites:
Pavel Sztefek, Robin Olsson
(Imperial College London, UK)
pdf file
Parameter Identification by the Virtual Fields Method: Application to the
Stiffness Radial Variability of P. Pinaster within the Stem:
J. Xavier, S. Avril, F. Pierron, J. Morais
(Arts et Metiers ParisTech, France / ENSM, France / CITAB-UTAD, Portugal)
pdf file
Session 12: Novel Methods
Multiscale Modeling for Characterization of Damage Resilient
Nanocomposites:
Akhilesh Jha, Terrisa Duenas, Shaoping Xiao, Ajit Mal, Fred Wudl, James R. Alexander,
Aaron Corder, Teng K. Ooi
(NextGen Aeronautics, USA / University of Iowa, USA / University of California Los
Angeles & Santa Barbara, USA / U.S. Army Aviation & Missile Research, Development
and Engineering Center, USA / Missile Defense Agency, USA / Office of Naval Research,
USA)
pdf file
OffAxis Notch Sensitivity Modeling of Fiber Metal Laminates:
M. Kawai, Y. Arai
(University of Tsukuba, Japan)
pdf file
Experimental and Numerical Study of Damage Propagation in Overheight
Compact Tension Tests:
Xiangqian Li, Stephen R. Hallett, Michael R. Wisnom, Reza Vaziri, Anoush Poursartip
(University of Bristol, UK / University of British Columbia, Canada)
pdf file
video1 file
video2 file
Measurements OF Elastic and Visoelastic Properties of Polymer Matrix
Composites through High Temperature Nanoindentation:
Y.C. Lu, G. A. Schoeppner, D.C. Jones, G. P. Tandon, S. Putthanarat
(University of Kentucky, USA / Air Force Research Laboratory, USA / University of Dayton
Research Institute, USA)
pdf file
Return to Attendees Page
here
.jpg){kind=logo}