Browse/search for people

Publication - Professor Richard Trask

    The structural efficiency of the sea sponge Euplectella aspergillum skeleton: bio-inspiration for 3D printed architectures

    Citation

    Brown, KR, Trask, R & Bacheva, D, 2019, ‘The structural efficiency of the sea sponge Euplectella aspergillum skeleton: bio-inspiration for 3D printed architectures’. Journal of the Royal Society Interface, vol 16.

    Abstract

    In Nature, despite the diversity of materials, patterns and structural designs, the majority of bio-mineralised systems share a common feature: the incorporation of multiple sets of discrete elements across different length scales. This paper is the first to assess whether the design features observed in the hexactinellid sea-sponge Euplectella aspergillum can be transferred and implemented for the development of new structurally efficient engineering architectures manufactured by 3D additive manufacturing (AM). We present an investigation into the design and survival strategies found in the biological system and evaluate their translation into a scaled engineering analogue assessed experimentally and through finite element simulations. Discrete sections of the skeletal lattice were evaluated and tested in an in-situ compression fixture using micro-computed tomography (μCT). This methodology permitted the characterisation of the hierarchical organisation of the siliceous skeleton; a multi-layered arrangement with fusion between struts to improve the local energy absorbing capabilities. It was observed that the irregular overlapping architecture of spicule-nodal point sub-structure offers unique improvements in the global strength and stiffness of the structure. The 3D data arising from the μCT of the skeleton were used to create accurate FE models and replication through 3DAM. The printed struts in the engineering analogue were homogeneous, comprising of bonded ceramic granular particles (10m to 100m) with an outer epoxy infused shell. In these specimens the compressive response of the sample was expected to be dynamic and catastrophic, but while the specimens showed a similar initiation and propagation failure pattern to E.aspergillum, the macroscopic deformation behaviour was altered from the expected predominantly brittle behaviour to a more damage tolerant quasi-brittle failure mode. In addition, the FE simulation of the printed construct predicted the same global failure response (initiation location and propagation directionality) as observed in E.aspergillum. The ability to mimic directly the complex material construction and design features in E.aspergillum is currently beyond the latest advances in AM. However, while acknowledging the material dominated limitations, the results presented here highlight the considerable potential of direct mimicry of biomineralised lattice architectures as future light-weight damage tolerant composite structures.

    Full details in the University publications repository