Browse/search for people

Publication - Dr Oliver Payton

    'Hi-Fi AFM'

    high-speed contact mode atomic force microscopy with optical pickups

    Citation

    Russell-Pavier, F, Picco, L, Payton, O, Day, J, Shatil, N & Yacoot, A, 2018, ‘'Hi-Fi AFM': high-speed contact mode atomic force microscopy with optical pickups’. Measurement Science and Technology.

    Abstract

    High-speed atomic force microscopy (HS-AFM) is a powerful emerging technique used to gain insight into real-time nanoscale dynamics and phenomena across the sciences. By performing measurements of material properties, abundancy counting and dimensional analysis, it enables a new generation of discoveries at the atomic scale. Here, we demonstrate the use of an optical pickup unit (OPU) typically found in PCs, Hi-Fis and games consoles worldwide, as a vertical detection system within in a HS-AFM operated in contact mode. The OPU displacement performance is compared to that of a commercially available laser Doppler vibrometer with ±15 pm resolution. Sub-nanometre sensitivity is achieved with an OPU, presented via the identification of two resonant modes of a cantilever stimulated by ambient thermal excitation. To demonstrate the large dynamic range of the sensor at fast scan-speeds, surface profiles with step heights in excess of 100 nm and surface textures less than 10 nm were collected using a custom OPU based HS-AFM. The high fidelity measurements are extended to visible length scales in short timescales by imaging areas of up to 200 µm2 area at a pixel rate of 2 megapixels/s, tip velocity of 10 mm/s and area rate of 25 µm2/s.

    Full details in the University publications repository