Browse/search for people

Publication - Professor Martyn Pavier

    Fracture of three-dimensional lattices manufactured by selective laser melting

    Citation

    Gu, H, Li, S, Pavier, M, Attallah, MM, Paraskevoulakos, C & Shterenlikht, A, 2019, ‘Fracture of three-dimensional lattices manufactured by selective laser melting’. International Journal of Solids and Structures, vol 180-181., pp. 147-159

    Abstract

    Experimentation has been performed to measure the fracture behaviour of three-dimensional lattices manufactured using a Selective Laser Melting (SLM) technique. Specimens have been designed using a compact tension (CT) geometry with different lattice orientations and fabricated from a relatively brittle Aluminum alloy. The toughness has been measured and an increase in fracture resistance has been observed during crack extension. The influence of lattice orientation has been demonstrated, which shows that a change in orientation will result in a different crack path, but the effect on toughness is small. Finally, the significance of specimen size on toughness measurement has been investigated using finite element (FE) analysis. The results show that the experimentally measured result have overestimated the fracture toughness of the lattice specimens by approximately 10% due to the insufficiently large specimen size.

    Full details in the University publications repository