What do the teaching blocks (TB) mean?
This Integrated Master's programme has been designated as type III: Professional, with a formal period of study abroad, in accordance with the QAA descriptors for Master's programmes. Please see the Regulations and Code of Practice for Taught Programmes for further information on this type of programme.
Unit name | Unit code | Credit points | Status | Teaching Block |
---|---|---|---|---|
Min 20cp from:- | ||||
Water Resources Risk Management 4 | CENGM0018 | 10 | Optional | TB-2 |
Earthquake Resistant Structures | CENGM0055 | 10 | Optional | TB-1 |
Geotechnical Engineering Practice | CENGM0038 | 10 | Optional | TB-2 |
Min 10cp from:- | ||||
Civil Engineering Systems 4 | CENGM1800 | 10 | Optional | TB-1 |
Sustainable Systems | CENGM0033 | 10 | Optional | TB-1 |
Asset Management 4 | CENGM0031 | 10 | Optional | TB-2 |
If no Research Project taken abroad then Research Project 4 is required. If no research project or design project was taken then Research project 4 is required and Timber Engineering 4 must also be taken. | ||||
Design Project 4 | CENGM6100 | 40 | Optional | TB-4 |
Research Project 4 | CENGM0012 | 40 | Optional | TB-4 |
A maximum of 30cp from the list (all units from this list must have been taken by the end of Year 4). | ||||
Advanced Structural Analysis | CENG30010 | 20 | Optional | TB-4 |
Water Engineering 3 | CENG33600 | 10 | Optional | TB-2 |
Civil Engineering Systems 3 | CENG33900 | 10 | Optional | TB-1 |
Design of Geotechnical Structures | CENG30005 | 10 | Optional | TB-1 |
0-50cp from below list to make year up to 120cp | ||||
Soil-Structure Interaction 4 | CENGM2700 | 10 | Optional | TB-1 |
Hydrological Engineering for Developing Countries | CENGM0056 | 10 | Optional | TB-1 |
Smart Cities 4 | CENGM0052 | 10 | Optional | TB-1 |
Timber Engineering 4 | CENGM0053 | 10 | Optional | TB-1 |
Engineering Seismology | CENGM0041 | 10 | Optional | TB-1 |
Disaster Risk Reduction | CENGM0044 | 10 | Optional | TB-2 |
Analysis and Design of Structures | CENGM0046 | 10 | Optional | TB-2 |
Engineering Design for Wind and Marine Power | AENGM3102 | 10 | Optional | TB-1 |
Innovation, Entrepreneurship and Enterprise | INOVM0013 | 10 | Optional | TB-1 |
Hazards and Infrastructure | CENGM0051 | 10 | Optional | TB-2 |
Power Generation for the 22nd Century | MENGM0002 | 10 | Optional | TB-2 |
Engineering for International Development | CENGM0032 | 10 | Optional | TB-2 |
Soil Dynamics and Earthquake Geotechnics | CENGM0039 | 10 | Optional | TB-2 |
Transport and Mobility Modelling | EMATM0021 | 10 | Optional | TB-1 |
Civil Engineering with Study in Continental Europe (MEng) | 120 |
Unit Pass Mark for Undergraduate Programmes:
For details on the weightings for classifying undergraduate degrees, please see the Agreed Weightings, by Faculty, to be applied for the Purposes of Calculating the Final Programme Mark and Degree Classification in Undergraduate Programmes.
For detailed rules on progression please see the Regulations and Code of Practice for Taught Programmes and the relevant faculty handbook.
Please refer to the specific progression/award requirements for programmes with a preliminary year of study, the Gateway programmes and International Foundation programmes.
All undergraduate degree programmes allow the opportunity for a student to exit from a programme with a Diploma or Certificate of Higher Education.
Integrated Master's degrees may also allow the opportunity for a student to exit from the programme with an equivalent Bachelor's degree where a student has achieved 360 credit points, of which 90 must be at level 6, and has successfully met any additional criteria as described in the programme specification.
The opportunities for a student to exit from one of the professional programmes in Veterinary Science, Medicine, and Dentistry with an Award is outlined in the relevant Programme Regulations (which are available as an annex in the Regulations and Code of Practice for Taught Programmes).
An Ordinary degree can be awarded if a student has successfully completed at least 300 credits with a minimum of 60 credits at Level 6.
The pass mark for the professional programmes in Veterinary Science, Medicine and Dentistry is 50 out of 100. The classification of a degree in the professional programmes in Veterinary Science, Medicine, and Dentistry is provided in the Regulations and Code of Practice for Taught Programmes.