Programme structure: Civil Engineering with Study Abroad (MEng) - what's running in 2019/20

This Integrated Master's programme has been designated as type III: Professional, with a formal period of study abroad, in accordance with the QAA descriptors for Master's programmes. Please see the Regulations and Code of Practice for Taught Programmes for further information on this type of programme.

CENGM0062 is a must pass unit. For the definition of must pass units please see the Glossary of Terms from Annex 1 to the Regulations and Code of Practice for Taught Programmes at http://www.bristol.ac.uk/esu/assessment/annex/glossary.html

Unit name	Unit code	Credit points	Status	Teaching Block
Select a minimum of 20cp from:-
Water Resources Risk Management 4	CENGM0018	10	Optional	TB-2
Earthquake Resistant Structures	CENGM0055	10	Optional	TB-1
Geotechnical Engineering Practice	CENGM0038	10	Optional	TB-2
Select a minimum of 10cp from:-
Civil Engineering Systems 4	CENGM1800	10	Optional	TB-1
Sustainable Systems	CENGM0033	10	Optional	TB-1
Asset Management 4	CENGM0031	10	Optional	TB-2
If no Research Project taken abroad then Research Project 4 is required. If no research project or design project was taken then Research project 4 is required and Timber Engineering 4 must also be taken. If Research Project was taken abroad then Design Project is required.
Design Project	CENGM0062	40	Optional	TB-4
Research Project 4	CENGM0012	40	Optional	TB-4
A maximum of 30cp from the list (all units from this list must have been taken by the end of Year 4).
Advanced Structural Analysis	CENG30010	20	Optional	TB-4
Water Engineering 3	CENG33600	10	Optional	TB-2
Civil Engineering Systems 3	CENG33900	10	Optional	TB-1
Design of Geotechnical Structures	CENG30005	10	Optional	TB-1
0-50cp from below list to make year to 120cp
Engineering Design for Wind and Marine Power	AENGM3102	10	Optional	TB-1
Engineering for International Development	CENGM0032	10	Optional	TB-2
Soil Dynamics and Earthquake Geotechnics	CENGM0039	10	Optional	TB-2
Engineering Seismology	CENGM0041	10	Optional	TB-1
Disaster Risk Reduction	CENGM0044	10	Optional	TB-2
Analysis and Design of Structures	CENGM0046	10	Optional	TB-2
Hazards and Infrastructure	CENGM0051	10	Optional	TB-2
Timber Engineering 4	CENGM0053	10	Optional	TB-1
Hydrological Engineering for Developing Countries	CENGM0056	10	Optional	TB-1
Soil-Structure Interaction 4	CENGM2700	10	Optional	TB-1
Power Generation for the 22nd Century	MENGM0002	10	Optional	TB-2
Transport and Mobility Modelling	EMATM0021	10	Optional	TB-2
Innovation, Entrepreneurship and Enterprise	INOVM0013	10	Optional	TB-1
Civil Engineering with Study Abroad (MEng)		120

Progression/award requirements

Unit Pass Mark for Undergraduate Programmes:

• 40 out of 100 – for level C/4, I/5 & H/6 units
• 50 out of 100 – for level M/7 units

For details on the weightings for classifying undergraduate degrees, please see the Agreed Weightings, by Faculty, to be applied for the Purposes of Calculating the Final Programme Mark and Degree Classification in Undergraduate Programmes.

For detailed rules on progression please see the Regulations and Code of Practice for Taught Programmes and the relevant faculty handbook.

Please refer to the specific progression/award requirements for programmes with a preliminary year of study, the Gateway programmes and International Foundation programmes.

Exit awards

All undergraduate degree programmes allow the opportunity for a student to exit from a programme with a Diploma or Certificate of Higher Education.

• To be awarded a Diploma of Higher Education, a student must have successfully completed 240 credit points, of which at least 90 must be at level 5.
• To be awarded a Certificate of Higher Education, a student must have successfully completed 120 credit points at level 4.

Integrated Master's degrees may also allow the opportunity for a student to exit from the programme with an equivalent Bachelor's degree where a student has achieved 360 credit points, of which 90 must be at level 6, and has successfully met any additional criteria as described in the programme specification.

The opportunities for a student to exit from one of the professional programmes in Veterinary Science, Medicine, and Dentistry with an Award is outlined in the relevant Programme Regulations (which are available as an annex in the Regulations and Code of Practice for Taught Programmes).

Degree classifications:

• First Class Honours 70 and above
• Second Class Honours, First Division 60-69
• Second Class Honours, Second Division 50-59
• Third Class Honours 40-49
• Fail 39 and below

An Ordinary degree can be awarded if a student has successfully completed at least 300 credits with a minimum of 60 credits at Level 6.

The pass mark for the professional programmes in Veterinary Science, Medicine and Dentistry is 50 out of 100. The classification of a degree in the professional programmes in Veterinary Science, Medicine, and Dentistry is provided in the Regulations and Code of Practice for Taught Programmes.